Bolin D20H Dante Av Transceiver Hdmi

Bolin D20h Dante Av Transceiver Hdmi

Product Code: eq99541
Availability: In Stock

$3,885.00 $5,011.65

Qty

7 reviews Write a review

Description
Reviews (7)

Configure this Bolin D20H Dante AV Transceiver HDMIfrom Bolin D20H Dante AV Transceiver HDMIas either a encoder or decoder depending on your routing needs. The D20 features an HDMI input and HDMI output for monitors. The HDMI output port supports up to DCI or UHD 4K60 video with HDCP 2.2 for demanding conference room or classroom applications.

Two RJ45 ports, one for Gigabit Ethernet and one with PoE support, offer connection to your IP network. Another RJ45 port offers RS-422 serial control, which is just one form of control you can utilize with the transceiver. USB Type-A ports can connect keyboards and/or mice to the device for USB-over-IP interfacing. An IR transmitter output and receiver input allows for remote control.

Configure as an Encoder or Decoder HDMI Input, HDMI Output Up to DCI/UHD 4K60 Video Gigabit Ethernet & PoE LAN Ports HDCP 2.2 Support, RS-422 Serial Control USB-over-IP Support

Key Specs
Video I/O	Input 1x HDMI 2.0 Female Output 1x HDMI 2.0 Female 1x BNC (12G-SDI) Female 1x HDMI 2.0 Female (Monitor)
Audio I/O	No
Video Resolution	HDMI Input/Output (8/10/12-Bit 4:4:4/4:2:2/4:2:0 RGB, YCC) 4096 x 2160 at 23.98/24/25/29.97/30/50/59.94/60 fps 3840 x 2160 at 23.98/24/25/29.97/30/50/59.94/60 fps 1920 x 1080p at 23.98/24/25/29.97/30/50/59.94/60 fps 1920 x 1200 at 23.98/24/25/29.97/30/50/59.94/60 fps 1600 x 1200 at 23.98/24/25/29.97/30/50/59.94/60 fps 1280 x 720 at 23.98/24/25/29.97/30/50/59.94/60 fps 1280 x 1024 at 23.98/24/25/29.97/30/50/59.94/60 fps 1024 x 768 at 23.98/24/25/29.97/30/50/59.94/60 fps 800 x 600 at 23.98/24/25/29.97/30/50/59.94/60 fps 720 x 576p at 23.98/24/25/29.97/30/50/59.94/60 fps 720 x 480p at 23.98/24/25/29.97/30/50/59.94/60 fps 640 x 480 at 23.98/24/25/29.97/30/50/59.94/60 fps SDI Output (8/10/12-Bit 4:2:2/4:2:0 YCC) 4096 x 2160 at 23.98/24/25/29.97/30/50/59.94/60 fps 3840 x 2160 at 23.98/24/25/29.97/30/50/59.94/60 fps 1920 x 1080p at 23.98/24/25/29.97/30/50/59.94/60 fps 1920 x 1200 at 23.98/24/25/29.97/30/50/59.94/60 fps 1600 x 1200 at 23.98/24/25/29.97/30/50/59.94/60 fps 1280 x 720 at 23.98/24/25/29.97/30/50/59.94/60 fps 1280 x 1024 at 23.98/24/25/29.97/30/50/59.94/60 fps 1024 x 768 at 23.98/24/25/29.97/30/50/59.94/60 fps 800 x 600 at 23.98/24/25/29.97/30/50/59.94/60 fps 720 x 576p at 23.98/24/25/29.97/30/50/59.94/60 fps 720 x 480p at 23.98/24/25/29.97/30/50/59.94/60 fps 640 x 480 at 23.98/24/25/29.97/30/50/59.94/60 fps RJ45 Input/Output (8-Bit 4:4:4 RGB, YCC) 4096 x 2160 up to 60 fps RJ45 Input/Output (8/10/12-Bit 4:2:2 YCC) 4096 x 2160 up to 60 fps
Audio Format	Unspecified Digital Signal Input/Output: 32 kHz Unspecified Digital Signal Input/Output: 96 kHz
Broadcast System Compatibility	NTSC, PAL
IP Video	Encoding, Decoding MJP2 4096 x 2160 at 60p (200.00 to 800 Mb/s)
IP Audio	Encoding, Decoding Dante
Wireless	No
OS Compatibility	Windows 10 or Later macOS 10.14 to 11
Parameters
Audio I/O	No
Other I/O	Input 1x Mini-USB (Service) 1x 1/8" / 3.5 mm (IR) 2x USB-A (Device) Output 1x 1/8" / 3.5 mm (IR) Input/Output 2x RJ45 (10/100/1000 Ethernet) 1x RJ45 (RS-422)
Expansion Slots	No
Latency	< 10 ms
Video Resolution	HDMI Input/Output (8/10/12-Bit 4:4:4/4:2:2/4:2:0 RGB, YCC) 4096 x 2160 at 23.98/24/25/29.97/30/50/59.94/60 fps 3840 x 2160 at 23.98/24/25/29.97/30/50/59.94/60 fps 1920 x 1080p at 23.98/24/25/29.97/30/50/59.94/60 fps 1920 x 1200 at 23.98/24/25/29.97/30/50/59.94/60 fps 1600 x 1200 at 23.98/24/25/29.97/30/50/59.94/60 fps 1280 x 720 at 23.98/24/25/29.97/30/50/59.94/60 fps 1280 x 1024 at 23.98/24/25/29.97/30/50/59.94/60 fps 1024 x 768 at 23.98/24/25/29.97/30/50/59.94/60 fps 800 x 600 at 23.98/24/25/29.97/30/50/59.94/60 fps 720 x 576p at 23.98/24/25/29.97/30/50/59.94/60 fps 720 x 480p at 23.98/24/25/29.97/30/50/59.94/60 fps 640 x 480 at 23.98/24/25/29.97/30/50/59.94/60 fps SDI Output (8/10/12-Bit 4:2:2/4:2:0 YCC) 4096 x 2160 at 23.98/24/25/29.97/30/50/59.94/60 fps 3840 x 2160 at 23.98/24/25/29.97/30/50/59.94/60 fps 1920 x 1080p at 23.98/24/25/29.97/30/50/59.94/60 fps 1920 x 1200 at 23.98/24/25/29.97/30/50/59.94/60 fps 1600 x 1200 at 23.98/24/25/29.97/30/50/59.94/60 fps 1280 x 720 at 23.98/24/25/29.97/30/50/59.94/60 fps 1280 x 1024 at 23.98/24/25/29.97/30/50/59.94/60 fps 1024 x 768 at 23.98/24/25/29.97/30/50/59.94/60 fps 800 x 600 at 23.98/24/25/29.97/30/50/59.94/60 fps 720 x 576p at 23.98/24/25/29.97/30/50/59.94/60 fps 720 x 480p at 23.98/24/25/29.97/30/50/59.94/60 fps 640 x 480 at 23.98/24/25/29.97/30/50/59.94/60 fps RJ45 Input/Output (8-Bit 4:4:4 RGB, YCC) 4096 x 2160 up to 60 fps RJ45 Input/Output (8/10/12-Bit 4:2:2 YCC) 4096 x 2160 up to 60 fps
Audio Format	Unspecified Digital Signal Input/Output: 32 kHz Unspecified Digital Signal Input/Output: 96 kHz
Embedded Audio	HDMI Input: 8-Channel HDMI Output: 2-Channel
Reclocking	No
Standards
Video Standard Compliance	SMPTE: 292M/352/424M/424M-A/ST-2081/ST-2082
HDCP Support	Yes, Version 2.2
HDR Support	Yes, HDR10
Broadcast System Compatibility	NTSC, PAL
IP Streaming
IP Video	Encoding, Decoding MJP2 4096 x 2160 at 60p (200.00 to 800 Mb/s)
IP Audio	Encoding, Decoding Dante
Transport Protocols	Dante
Hardware
Wireless	No
OS Compatibility	Windows 10 or Later macOS 10.14 to 11
Power
Power I/O	1x Barrel (12 VDC ) Input
PoE Support	PoE++ 802.3bt
General
Operating Conditions	22 to 72°F / -10 to 40°C at 10 to 90% Humidity
Storage Conditions	32 to 104°F / 0 to 40°C
Certifications	CE, FCC
Dimensions	8.5 x 5.84 x 1.7" / 216.5 x 148.35 x 44 mm
Weight	2.5 lb / 1.1 kg
Packaging Info
Package Weight	6.53 lb
Box Dimensions (LxWxH)	14.1 x 11.2 x 3.9"

The D20H Dante AV transceiver supports sub-microsecond video and audio synchronization by designating a single network clock that always keeps the video in sync with audio regardless of the number of endpoints in the ecosystem, fixing lip-sync problems.

As a decoder with unicast and multicast capabilities, the D20H receives the signal from a Dante AV PTZ camera or an encoder and feeds it to a display device via the output port. Using the controller software, the decoder can quickly and easily switch between multiple endpoints with no need for breakouts or matrix switches to display the video on any number of screens.

The transceiver can be configured as an individual encoder or decoder via a firmware update.

The D20H can output 4K60 images via its HDMI ports. An integrated high-performance scaling engine provides downscaling to the encoded source for a wide array of 4K, UHD 4K, and HD resolutions to match the different capabilities and requirements of other equipment.

It supports standard Dante compatible networked audio streams from encoders and audio interfaces. The received Dante audio streaming can be combined with the video and then output via the HDMI ports.

A built-in RS-422 serial port can be used with a PTZ joystick controller. Full setup, control, and monitoring of the device is enabled with the Dante Controller software with features like automatic device discovery and system configuration. Two USB Type-A ports and a USB Mini-B port provide control over IP using a keyboard and/or mouse with a remote computer.

Related Questions and Answers

Q: 1. Will the 1/8" input accept a signal from the Rode Wireless Go receiver? I need to embed these mics to the HDMI signal.

A: Yes. All that would be need is a 1/8 to 1/8 cable. Pearstone Stereo Mini Male to Stereo Mini Male Cable (Black, 6') BH #PEMMSA106B • MFR #MMSA-106B https://bhpho.to/35HGO5V

Q: 2. CAN THE AViPAS AV-3104IP 4D Joystick PTZ Controller CONTROL THIS CAMERA?

A: Yes. The controller will work as well with the following models mentioned. AViPAS AV-1070 AViPAS AV-1071 AViPAS AV-1080 AViPAS AV-1081 AViPAS AV-1082 AViPAS AV-1250 AViPAS AV-1251 AViPAS AV-1280 AViPAS AV-1281 AViPAS AV-1361 AViPAS AV-1362 AViPAS AV-1364 AViPAS AV-1560 AViPAS AV-1562 AViPAS AV-1563 AViPAS AV-2000 AViPAS AV-2010 AViPAS AV-2020 Alfatron ALF-10X DVDO C3-1 Roland PTZ-1 Bundle

Q: 3. I have read there is no control via app, I am assuming these questions refer to android or IOS control. I am asking if there is any ntework control options at all, through IP/Network, or are the only control options the RS232 and IR remote?

A: According to AViPAS this camera can be controlled via IP connection, in a program such as OBS (Open Broadcast Software: https://obsproject.com/). "AV-1081 uses a built-in TCP server... TCP/UDP control is both based on the VISCA protocol. You may use them according to OBS or other software's control options." https://www.avipas.com/product-page/av-1081-10x-hdmi-ptz-camera

Q: 4. Are there filter threads on this camera?

A: The Bolin Technology N2-210X NDI|HX3 PTZ Camera does not have lens filter threads.

Q: 5. Can you control this with PTZOPTICS iOS app?

A: We are only aware of the PTZ Optics iOS App workng wth PTZ Optics cameras.

Q: 6. Can this be controlled by a panasonic rw-50 controller?

A: It cannot be. That Panasonic remote only works with select Panasonic cameras.

Q: 7. Zoomed completely Out Still a little to close (camera to person) can not move camera back. are there any other adjustment I can Make?

A: If the AViPAS AV-1081 HDMI PTZ Camera (Dark Gray) when all zoom out is still too close, you need to move the camera or the subject.

Q: 8. Do the Bolin PTZ cameras use UVC-PTZ?

A: This model camera, the Bolin Technology B2-220 HDMI/3G-SDI/USB/IP PTZ Camera with 20x Optical Zoom does offer UVC/UAC. This may not be the case across their entire lineup however.

Q: 9. Can this be controlled by the Sony RM-IP10?

A: Unfortunately no. The Sony RM-IP10 will not work with this camera. The AViPAS AV-1081 HDMI PTZ Camera (White).

Q: 10. Will it connect video out to a display via USB-C?

A: Yes, the Bolin Technology B2-220 HDMI/3G-SDI/USB/IP PTZ Camera with 20x Optical Zoom will produce a video signal from the USB-C to a display.

Leonardo	22/09/2024
[NTSC, PAL] This camera is great! It is not one of the most feature rich, but to me it matched exactly what I needed, and paired with obs, a couple of obs plugins and an app called touchportal, I am now able to do complex scene transitions and even animations between this camera and a fixed wide-shot camera with the click of a button. If you will buy this, do take extra care with the lower-than-normal max zoom level and tilt extents (to me it was perfectly fine, but it may not be for you) 5

anyonymous	15/08/2024
[NTSC, PAL] works as advertised, no issues 5

Dennis	05/08/2024
[NTSC, PAL] I found these because I needed a more affordable Dante interface for Webex Room Kit integrations with Ceiling Conference Microphones using Dante. For Webex Room kits, they only accept Mic Level inputs so the switchable line level to mic level worked perfectly. It only needed a $11 of parts with a TRRS 4 pin Phoenix adapter and a female XLR pigtail. Works perfectly, sounds great, much cheaper than the alternative. 5

Warren	01/07/2024
[ < 10 ms] Just got it set up. It works well with our ATEM Mini Pro switcher. I will be ordering a second one. 5

Michael	26/06/2024
[NTSC, PAL] If you are looking for a high quality build with powerful headphone amp, which can plug in anywhere on the Dante network, look no further. I love this thing! Another valuable feature is having both 1/8in & 1/4in jacks built in. 5

Edward	01/06/2024
[Dante] This was an awesome addition to my church livestreaming unit. I bought a joy stick to operate two cameras which work better than the remote controls. For the price you can't go wrong. 5