Pelican 3765PL Rechargeable LED Flashlight 2022 Yellowengineered the high-visibility yellow Pelican 3765PL Rechargeable LED Flashlight 2022 Yellowto hold up to the demanding needs of firefighters and workers in hazardous industrial environments.

The head of the 3765 is set at a right angle to its body, making it ideal for wearing on a belt, a harness, or MOLLE-type gear for hands-free use. The single primary LED produces a low output of 113 lumens with a high of 237 lumens, with a secondary low-output LED set at a downward angle to light the way directly in front of you for added safety in smoky conditions. An auxiliary flashing mode can be used to signal to a partner. The light is driven by four included NiMH batteries that can be recharged in the flashlight using the included charging base. If your batteries run out before your shift is over, the light can run on four standard AA alkaline batteries.

The body is made of ABS plastic, which is corrosion, impact, and temperature resistant. Its resistance to high temperatures ensures it will keep working in extreme conditions, while also remaining a neutral comfortable temperature in cold and wet conditions. The body is sealed to an IPX4 rating, allowing its use in driving rain and water.  A photoluminescent shroud around the lens absorbs light from the environment or the flashlight itself to glow, making it easier to see in the dark.

113/237-Lumen White Light Output    140-Lumen Flashing Signal/Location Mode    Secondary 32-Lumen Downcast Light    Simple Push-Button Switch    Impact- & Temperature-Resistant ABS Body    IPX4-Rated, Water Resistant    Charging Base with 110 VAC Cord

• Low output of 113 lumens
• High 237-lumen output
• Single white primary LED
• 140-lumen flashing mode can be used to signal or to mark location
• 32-lumen downcast light illuminates the area directly in front of the user for safe navigation

• Type: Push button
• Location: Top of head
• Opt for low or high output with downcast light, or downcast only
• Press and hold switch to activate flashing signal mode

• Glow-in-the-dark photoluminescent shroud absorbs light from environment or the flashlight
• Yellow ABS polymer plastic housing
• Temperature, impact, and corrosion resistant
• Integrated oversized hands-free clip for pockets or harnesses
• IPX4-rated water resistant against driving rain or water jets
• Locking battery compartment door

• Integrated battery level and charging indicators
• Runs on four included rechargeable NiMH batteries
• Capable of running on four disposable AA alkaline batteries
• Charging base with 110 VAC power cord included

• NFPA 1901 standard for use by firefighters and in hazardous industrial environments
• UL Class I, Division 1 and Class I, Division 2

Related Questions and Answers

Q: 1. Can a Canon EOS Rebel T5 with 18-55mm lens fit in this case?

A: My Nikon D-3200 will only fit in this case when I take the lens off. The lens and the camera body will fit into this case lying flat and not connected and you will need to install both lens caps and the camera body cap.

Q: 2. Hey guys! Do you think a Fujifilm XT-1 with battery grip attached (inserted vertically), XF35mm f2.0, XF18mm and possibly an 18-55mm f2.8-4.0 fit in here? Cheers!

A: I think it may be too tight. Get height and length of camera and lens and figure you need about an inch more than that on interior dimensions of the pelican. You may need to go bigger.

Q: 3. will the pelican 1400 hold my d7100 and 18-140 and 55-300 lens?

A: Interior Specs of the Pelican 1400 are . 11.81 x 8.87 x 5.18 (30 x 22.53 x 13.16cm) (LxWxH) It may be a little tight but you may be able to create a layout that would work. I skectched out my sizes before ordering to figure out how I was going to fit in my three 1800W HMI bulbs. My instinct for yours might be that it might a little small for what you need.

Q: 4. Would this fit a BlackMagic Pocket 6K plus Atomos Shinobi monitor?

A: Yes, the Pelican 1524 Waterproof 1520 Case with Padded Dividers (Black) will hold the Blackmagic Design Pocket Cinema Camera 6K and the Atomos Shinobi 5" 4K HDMI Monitor.

Q: 5. Has anyone used this case for a NightForce TS-82 Spotting scope? I'm concerned about the 82mm Objective lens not having enough padding. It's approximately 4.25 in diameter.

A: I am using this case for my vortex razor HD 27-60x85 spotting scope, and it works just fine imo.

Q: 6. Will a zoom F8 and its ac plug fit comfortably in this box? Would it be able to fit 1 spare AA battery case in this configuration?

A: It will fit the F8 and it's AC and should be able to squeeze the AA case as well.

Q: 7. Will this fit Nikon z6?

A: The camera with 1 or 2 lenses would fit.

Q: 8. What is the diameter of the lock holes on the Pelican 1520 case?

A: The is approximately 7mm.

Q: 9. What is the Harmonized System Code for the Pelican 1520 case?

A: Unfortunately we are unable to give this information out as of now. You will need to e-mail us with this inquiry at a href= http://sales@bhphotovideo.com. target= _blank sales@bhphotovideo.com./a

Q: 10. Can I fit my Elektron Digitakt? Thanks!

A: I believe the 1200 case is bit to small, you should measure the device & refer to the Pelican case site for dimensions on the next size case !