The Oben AC-1431 Aluminum Tripod with Ball Headprovides supports up to 8.8 lb, rises to a maximum height of 59.5" with the center column fully extended, and folds down to a compact 21" for transport. Flip locks on the four-section legs facilitate rapid setup and break down. Three leg angles: normal (80°), low (55°) and extra low (24°) are available via angle adjustment tabs at the joint of each leg.

The center column can be reversed with a twist of the butterfly knob, or it can be split in two to be used as a short column for macro and low angle shooting as low as 8.1". Any combination of leg angles can be combined to accommodate uneven terrain, stairs or obstructions. A built-in bubble level helps you square up your compositions. For extra stability the center column employs a spring-loaded counterbalance hook.

The included BA-108 ball head features a single-action lever that controls its rotation and 360 degree panning while a robust ball-locking mechanism secures it solidly. The head's four bubble levels ensure accurate panoramas. The BA-108's built-in quick release comes with a camera plate that features a standard 1/4"-20 screw and a retractable, removable video pin to provide additional stability for camcorders. Since the head is removable, locking screws underneath the collar thwart torsion when re-attaching. The tripod comes with a carry case and shoulder strap for storage and transport.

Load Capacity: 8.8 lb    Max Height: 59.5"    Min Height: 8.1"    Folded Length: 21"    Leg Sections: 4    Weight: 3.25 lb    Anodized Aluminum Construction    Single Lever Ball Head    Five Bubble Levels

Center column can be separated into 2 parts to give you a short column for low angle and macro work

Center column is grooved to prevent rotation

Spring-loaded counterweight hook is located at the bottom of the center column

Leg cushions on 2 legs provide a firm grip in cold or wet weather

Tripod features reversible 1/4"-20 and 3/8"-16 screw to fit almost any head

Angle adjustment locks keep legs at the chosen angles

Angled rubber feet for maximum contact with the ground

Two included Allen keys attach to a tripod leg, so you're always ready to tighten components

Padded carry bag provides a snug fit for the tripod/head combination and features two heavy-duty zippers, an interior pocket with a zipper, and a shoulder strap

Related Questions and Answers

Q: 1. Is this tripod compatible with the pixio system

A: Only if you order the additional 1/4 to 3/8 adapter. Oben 3/8 -16 to 1/4 -20 Reducer Bushing, that increases the 1/4 to a 3/8 to fit to Pixio Robot.

Q: 2. Where is it made?

A: According to the information we have, our current inventory's Country of Origin is China. Please be aware this can change over the product's production life without notice.

Q: 3. Can this tripod be used for a Nikon D5100?

A: Yes, this tripod is capable of holding the D5000 camera with most any lens options you would commonly find with it.

Q: 4. Fold down description say 27 at product highlight and 23 in specification page? which is correct

A: The folded length is 23.1 inches for the tripod without the head and with the head it is about 27 inches.

Q: 5. Is this tripod compatible with a Canon EOS 5D Mark III?

A: The Oben AC-1441 4-Section Aluminum Tripod with BA-111 Ball Head is compatible with the Canon 5DIII.

Q: 6. Where can one buy a replacement plate for this tripod? I don't see one listed?

A: The replacement plate for the Oben AC-1321 Aluminum Tripod with BA-106A Ball Head is the Oben RP-5 Quick Release Plate for BA-106A and BA-106T Ball Heads. It can be found via the following link: https://bhpho.to/3MrfY3M.

Q: 7. Can you remove the center column?

A: you can remove the center column

Q: 8. Will this hold a Nikon D7000 and a 18-200 lens at 90 degrees without any issues?

A: I don't have the exact lens and camera combo that you are asking about but I also have a Nikon body and a medium telephoto lens that I use. I would say yes to your question. The ball head seems quite sturdy and clamping force is more than adequate for the weight of your lens and camera. I continue to be quite pleased with my purchase. I was not expecting a quick disconnect feature with the ball head and was surprised with its inclusion. //JM

Q: 9. Can you change out the head to use a fluid head?

A: Yes. The Oben BA-106A Single Lever Ball Head included with the Oben AC-1321 Aluminum Tripod is removable. The top base of the center column has reversible 1/4"-20 & 3/8"-16 male threads, so if your fluid head has a flat base and uses either1/4"-20 & 3/8"-16 threads, it may be used on the Oben AC-1321 Aluminum Tripod.

Q: 10. I can do that?- the center column becomes removable and reversible for a second method of achieving extremely low-angle shots.

A: Yes. The big wing nut comes off and reverses after you take out the center column.