1 Ghz Ethernet Cable

[2.8 to 4.9 dBi] I have 5 of these in my house and I really like them. I have replaced a variety of previous generations and these are much faster. They are all connected via 2.5ghz ethernet and an Unifi switch that supports 2.5ghz ethernet. I use the stand on 4 of the, and one is wall mounted.

[Wall, Ceiling] This is the simple but versatile device that I recommend as a router for all my friends and family, and will also use as an access point for them or small businesses where integrated solutions are too complex for a handful of users. Qualcomm Atheros chipset, with 350 Mbps WAN To LAN capability routing. Firmware has stabilized and now I am able to fully recommend (January 2021), albeit feature set is still lacking compared to AirRouter predecessor, but offers core abilities for baseline users. For the airCube, plug the ethernet from the modem into the WAN (eth0), then you may connect your computer via wireless or ethernet to the LAN ports (PoE In, 2, or 3), typing in https://192.168.1.1 in your web browser, with ubnt as username, and password printed on the label beneath. Most people are now aware and desiring to minimize wireless radiation, so I recommend them to turn off the 5 Ghz wireless, and configure the 2.4 Ghz for 20 MHz Channel Width, select channel 1, 6, or 11, while starting with 5 dBm output power (transmit power is logarithmic, so 5 dBm is 3mW, wile 20 dBm is 100 mW), and choose the SSID Name and Password. Look for a signal strength of -80 dBm or better (-55 to -60 dBm ideal) is recommended for stable links, and increase the output power until that range is achieved for desired places. Obviously, line of sight and height is appreciated for more effective communication. Increasing the Tx power on any wireless device will create a noise for other wireless devices. The rest you could choose to remain as default or configure more.

[RoHS] Short Ethernet cable that works.

[RJ45 Male] A Ethernet cable that works! And it was low cost.

[Windows ] We use these for our timeclocks that are not wifi but have an ethernet cable connection. Works well.

[12] Telephone, ethernet, cable and plugs facing every which way. Good stuff.

[Black] One pair of earphones for all devices! These earphones connect via 2.4Ghz, Bluetooth, and USB-C cable

[Bluetooth] I specifically got this unit because it does not operate in the 2.4 GHz bandwidth which is unbelievably overcrowded at the moment. I actually think the sound quality is a little better than my Line 6 Relay G90 unit that I have been using for the past five years. I used this system over the weekend in a casino where my line 6 unit had severe drop out issues due to the 2.4 GHz bandwidth. This unit performed flawlessly and I am very happy with it. The obvious weak link in this system though is the guitar cable which seems to be very cheap. I went ahead and ordered Neutrik connectors and bulk cable and made a couple of my own cables which are bulletproof. Overall you cannot beat the system for the quality and reliability in this price point.

[7.66 lb] [This review was collected as part of a promotion.] Cable modem works great but don't allow you to separate 2.4ghz and 5.0ghz. This prove to be painful when setting up hardware that uses 2.4ghz only such as printer, thermostat, garage, camera, etc, etc. Beside that, everything is great

[Cat 6a] Ethernet cables are ethernet cables, but these are fine!