2 Meter Lightning Cable

[Yes] Only need 1 m.2 in my system after getting this. Lightning fast and a good amount of storage. Nice work sabrent.

[0.42 lb] Using the 6 foot cable to power my lightning charger on my nightstand. Excellent cable.

[98' / 30 m] A good affordable 1 meter long multi mode fiber cable.

A good affordable 1 meter long multi mode fiber cable.

[3.38 lb] I like lightning

[USB-C Male] This cable makes super-fast data transfers. I hooked it up to my Xcellon M2NS USB-C 3.2 Gen 2 M.2 SSD Enclosure and was very impressed with the speeds it provided. This cable and an M.2 drive are a match made in heaven and give blazing speeds. It also rated for 8k or dual 4k monitor support which is fantastic. Another nice plus is it is rated to handle 240w power delivery so it can be used to charge or power most accessories (laptops, peripherals etc.). This cable is definitely future proof and ready for whatever you throw at it, including the ability to daisy chain up to 6 additional devices. It is designed to work with Thunderbolt 4, Thunderbolt 3, and USB-C so it is very versatile. The build quality is also fantastic. Cable feels great and is flexible but still sturdy. Connectors seem to be made of quality materials and should last a long, long time. This cable is great. [I have received this product in exchange for my honest review]

[Low Profile] This cable works with all types of U.2 drives when connected to a slim line SAS connector on the motherboard, HBA, or RAID card. It is universally compatible with Highpoint HBAs, other HBAs, or direct connection to the CPU. Speeds on the drives I have connected using this cable meet their full advertised speed.

This cable works with all types of U.2 drives when connected to a slim line SAS connector on the motherboard, HBA, or RAID card. It is universally compatible with Highpoint HBAs, other HBAs, or direct connection to the CPU. Speeds on the drives I have connected using this cable meet their full advertised speed.

[TRIM, UASP] This worked flawlessly for cloning a SATA M.2 drive that I had. I didn't check that it works with NVMe M.2 drives, but others have said that it does. It got a little warm while running, but it did clone an entire 128G drive in only a few minutes. One minor annoyance is that it doesn't use an M.2 screw, but rather some weird rubber nub that I found hard to use. I would prefer a screw, but it says it's tool-free so that's not exactly a surprise. I like the push-button clamshell thing it's got going on, but the instructions make it clear that it can really mess up your cable if you forget to take it out before opening the enclosure. It also only comes with a (really short) C-to-C USB cable. But I guess it's kind of expected that you're using newer hardware if you have M.2 drives. There are a whole bunch of cheap M.2 enclosures that are notorious for using unreliable JMicron controllers that run really hot. This appears to use a Realtek RTL8210b controller, which runs much better and does actually support NVMe and SATA. I didn't physically check that it does have that chip, but others have, and you can see for yourself what firmware is provided for this drive on Sabrent's site.

[6.6' / 2 m] This is a well made cable! Strong and tougher than most vinyl/plastic cables and works well for those who want a lightning cable which angles to the side. Great for use in a phone holder or reducing the hassle of the cable sticking out when putting your phone down. Great Cable!