2 Mm To Micro Usb Charger Adapter

I have another review that I wrote about this mic, but B&H's website doesn't appear to let me update that review. I've now been using this mic almost daily for over a year. The audio is crisp and clear, background noise is kept to a minimum, and people on the other end of the meeting/phone call give compliments on the detail that this mic captures. I used to use a condenser mic, but that also had the annoying feature of picking up a lot of 60Hz hum. This mic doesn't do that and I didn't have to make any adjustments to the room either. For the person who mentioned they couldn't fit it in a shockmount, it has one internally. That is why the mic is the size that it is. For those complaining about the USB port, mine hasn't had any issues. I accidentally bent the micro usb connector on the cheap cable they shipped with it and the mic survived just fine. The cable, on the other hand, was useless after that. I solved this problem by finding a 90 degree USB adapter so that the connector isn't pointing straight out the back of the mic. It now sits mostly flush and swiveling the mic is more likely to cause the adapter to disconnect at the other end. If your laptop, like mine, is usb-c only, don't try to buy long usb-c to usb-c cables. They are crazy expensive. Instead, try to buy a usb-c to mini or micro usb-b cable. They are much cheaper. My setup is usb-c to micro usb (10 feet), then an adapter from micro-usb to usb-c (1 inch), and then finally a short usb-c to 90 degree micro-usb adapter (6 inches).

[Cardioid] I have another review that I wrote about this mic, but B&H's website doesn't appear to let me update that review. I've now been using this mic almost daily for over a year. The audio is crisp and clear, background noise is kept to a minimum, and people on the other end of the meeting/phone call give compliments on the detail that this mic captures. I used to use a condenser mic, but that also had the annoying feature of picking up a lot of 60Hz hum. This mic doesn't do that and I didn't have to make any adjustments to the room either. For the person who mentioned they couldn't fit it in a shockmount, it has one internally. That is why the mic is the size that it is. For those complaining about the USB port, mine hasn't had any issues. I accidentally bent the micro usb connector on the cheap cable they shipped with it and the mic survived just fine. The cable, on the other hand, was useless after that. I solved this problem by finding a 90 degree USB adapter so that the connector isn't pointing straight out the back of the mic. It now sits mostly flush and swiveling the mic is more likely to cause the adapter to disconnect at the other end. If your laptop, like mine, is usb-c only, don't try to buy long usb-c to usb-c cables. They are crazy expensive. Instead, try to buy a usb-c to mini or micro usb-b cable. They are much cheaper. My setup is usb-c to micro usb (10 feet), then an adapter from micro-usb to usb-c (1 inch), and then finally a short usb-c to 90 degree micro-usb adapter (6 inches).

[Black] I started with the Micro, but soon desired some of the features found in this shotgun mic. I felt this version was a good balance between the micro and the more expensive NTG/Pro versions. I love the improved shockmount, a single mount is annoying since the mic bounces a lot with one mount. I also dig how versatile this mic is. I can use it on my cams or plug it into my computer for voiceovers. The pickup is much improved over the Micro, sound is more full, and overall I wish I had just started with this mic instead. It handles close and somewhat far audio pickup well, fulfilling pretty much all of my nearfield audio needs. I mostly use the 3.5mm input, but the USB output offers more granular control via RodeCentral. I like that's powered by USB/3.5mm, battery based mic's run the risk of running out at inopportune times. The only con is that I wish they'd provided the nicer coiled 3.5mm cable found in the Micro, but the supplied cable is fine.

Bought 2 of these cables with the intent to chop in half and solder the DIN connector of an Ultrasync One stock cable to make a direct timecode cable for Sony FX-3/30 cameras. With a little continuity test, solder, and heat shrink it works perfectly. These micro USB Multi connectors are longer with more pins than regular micro USB. Internal wires: Red=3.5mm Tip=Timecode, Yellow and Black=3.5mm Ring and Sleeve=Ground. Use this info as you like!

[USB] Works great, cute little android, perfect for phone micro usb to usb adapter.

[0.05 lb] I bought this because the Sabrent USB 3.2 Type-C Tool-Free Enclosure for M.2 PCIe NVMe and SATA SSDs does not come with a USB-C to USB-A adapter, and not all of my PCs have USB-C connectors. I can say for sure that this adapter works perfectly with this enclosure. I am very happy with my purchase.

[3' / 0.9 m] [This review was collected as part of a promotion.] I'm so glad I chose this micro USB charger from Belkin. The length of the charger is perfect for my needs, not too long or too short. The best part is that it charges extremely fast which is a big plus when charging my devices. This is a great product from Belkin!

[White] This adapter transforms your micro USB cable into a sturdy Lighting cable. It snaps on tightly, charges and transfers data well, works for both iPhone and iPad. Has been used with iPhone 5C, 6, 7 and iPad Air 2, iOS 13.3.1.

[USB-C Male] Adapter works as as advertised. Used to connect a USB micro camera to a newer phone that takes USB C

[3.8 W] I only had to purchase this adapter after the fact that I realized I accidentally purchased one of BMD's Microphones Converters w/o the Power supply. However I use these Micro-converters almost religiously! I like the switch to the USB-C Power adapter, its cleaner and easier to use than the Micro USB. All in all I'm more than satisfied with my purchase!