25 Ft Lan Ethernet Cable

[625 MHz] I purchased a 25' ethernet cable with high bandwidth capacity. I really needed this as my computer sits far from my router and sometimes I have trouble receiving a strong signal. At other times I just want the increased transmission speed from a direct connect. This cable has been perfect. The only issue I have had is that it fits so tightly into the laptop port that I have some trouble getting it out and am concerned that at some point I might snap off the little plastic piece that holds it in place. I don't want it to come out easily, but I also don't want it stuck in! For now, I'm super careful about pulling it out properly.

[Wall, Ceiling] This is the simple but versatile device that I recommend as a router for all my friends and family, and will also use as an access point for them or small businesses where integrated solutions are too complex for a handful of users. Qualcomm Atheros chipset, with 350 Mbps WAN To LAN capability routing. Firmware has stabilized and now I am able to fully recommend (January 2021), albeit feature set is still lacking compared to AirRouter predecessor, but offers core abilities for baseline users. For the airCube, plug the ethernet from the modem into the WAN (eth0), then you may connect your computer via wireless or ethernet to the LAN ports (PoE In, 2, or 3), typing in https://192.168.1.1 in your web browser, with ubnt as username, and password printed on the label beneath. Most people are now aware and desiring to minimize wireless radiation, so I recommend them to turn off the 5 Ghz wireless, and configure the 2.4 Ghz for 20 MHz Channel Width, select channel 1, 6, or 11, while starting with 5 dBm output power (transmit power is logarithmic, so 5 dBm is 3mW, wile 20 dBm is 100 mW), and choose the SSID Name and Password. Look for a signal strength of -80 dBm or better (-55 to -60 dBm ideal) is recommended for stable links, and increase the output power until that range is achieved for desired places. Obviously, line of sight and height is appreciated for more effective communication. Increasing the Tx power on any wireless device will create a noise for other wireless devices. The rest you could choose to remain as default or configure more.

[512] I use this with a 20gbps ethernet SFP+ backbone uplink from the UniFi SFP+ Aggregation Switch. My LAN has never been faster!

[USB-C Female] I had a 6 ft cable and a 3 ft cable this worked saving me on a new cable

[RoHS] Short Ethernet cable that works.

[RJ45 Male] A Ethernet cable that works! And it was low cost.

[4x HDMI] I'm running two apple monitors(same view) to run pro tools in two different rooms about 25 ft away- works great- the color is richer and clearer than it ever was! On both screens!

[139 dB SPL] Great sound and great range. easy to set up and it cones with a 25 ft cord.

I have tried several cheaper antenna's but was only getting 25% signal was able to get pics from link micro lte but antenna quit working . So i bought the spypoint long range and upon connection signal jumped to 90% . it is mounted on 18 ft pvc 1.5 in. camera is at 5 ft . pvc is tied to a metal fence Tpost. . have lit 10 battery is great last about six weeks at 1minute delay and sends each detection . at this time for me spypoint is the way to go value, affordability and service.

[3.2 lb] I have tried several cheaper antenna's but was only getting 25% signal was able to get pics from link micro lte but antenna quit working . So i bought the spypoint long range and upon connection signal jumped to 90% . it is mounted on 18 ft pvc 1.5 in. camera is at 5 ft . pvc is tied to a metal fence Tpost. . have lit 10 battery is great last about six weeks at 1minute delay and sends each detection . at this time for me spypoint is the way to go value, affordability and service.