2.5 Inch Sata External Usb Hard Drive Enclosure

[Black] I had been looking for a reasonable priced enclosure for a 2.5 SATA drive to use as a backup drive for my laptop. This one fits the bill! Kind of odd that it has a USBA connector, but that doesn't affect its operation.

[Zippered] Works great with a Sabrent 2.5 SATA to USB 3.0 Tool-Free External Hard Drive Enclosure.

[1x 3.5" ] The SATA drive went into the enclosure smoothly and is working great.

[Black] I had an old 2.5 hard drive that I had salvaged out of a failed SeaGate enclosure. The problem with this hard drive was that it was an odd size, 15mm tall, so I was extremely limited in my choices for enclosures, and this seemed to be one of the only ones that could accommodate it. This little enclosure is great. It's constructed fully out of aluminum, no flimsy plasticky parts in here. Very easy to install, hard drive fits perfectly, and sits very secure inside the enclosure. I don't feel worried picking the thing up, throwing it into a bag and taking it place to place. When it's all set up I get very fast read and write speeds as promised, limited only by your hard drive RPM or your SSD rating.

[10.285 lb] I needed to clone my failing 3 1/2 inch SATA hard drive. This dock was easy to set up and use for this purpose. Since I will probably have to copy or clone 2 1/2 drives in the future, I wanted the ability to use it with 2 1/2 inch drives too. There is plenty of free cloning software out there. I used the free version of the Macrium software which worked quickly and perfectly.

[0.495 lb] easy to fit a new SSD to clone to original SATA drive, and now it is an extra external hard drive, using the old SATA drive

[8 to 90%] Using the enclosure for external drive on MacBook Pro 13 unibody. Wanted the Firewire 800 speed for an external bootable drive. Found it best to follow instructions of NOT screwing the hard drive down to the heat sink(even though there were enough screws in the package to do so). As it turned out two of the drives I was using were bad so it was easy to just open the end-cap and slide the I/O board with hard drive out to replace then slide it back in. The two end-caps (one permanent the other has screws to hold it in place) hold parts inside fairly well with a 2.5 5400 rpm SATA hard drive. This case is not intended to be water-proof, shock-proof or dust-proof etc. Just an enclosure for an external hard drive best used laying flat and still. Happy with the fact that package includes USB 2 to USB 3 cable as well as Firewire 800 cable. device is capable of daisy-chaining Fireire 800 devices since it has two ports. Included is a pleather carrying case. Has a tiny on-off switch. Case is see-through clear plastic with reasonably thick construction. The blue LED when turned on is a good visual cue not to shake or move the enclosure as the hard-drive is on and spinning. Careful not to tighten side screws to hold the end-cap in place is they may strip or crack the plastic piece.

[1x 2.5"] This External Hard Drive Enclosure is ideal for those who need a fast and reliable solution to back up, copy, etc. their data. And additionally you get a free version of Acronis True Image solution. Top product in top quality.

[Silver / Black] This is my third Storejet enclosure. It's an easy way to take a hard drive from a laptop destined for recycling and repurposing the drive as an external USB drive.

[0.005 lb] I use this adapter to connect an external hard drive to my Samsung Galaxy Tab S. Tablets only have mini usb ports. To use an external or any other device that uses a usb port, you'll need this adaptor. I also recommend getting an adapter that has a mini USB port on the adapter so you can keep your tablet charging while you use it with the USB device.