5.1 Bluetooth Receiver Board

[1.0 lb (0.4 kg)] Very good Bluetooth receiver.

[28 x 17 x 9.5"] I have an old technics receiver and when 5.1 is turned on it doesnt get warm, it gets really hot, however, since the very first day i started using the T10 the situation changed. I did several tests and i can say this thing works and very good. At higher speeds you can listen some noise coming from the fan, but if you are playing movies or music you are not going to listen it. Im using it in medium speed and the noise is pretty low. In my test i first started using the receiver at high volume with the 5.1 turned on (The T10 was Off). The temperature after one hour was pretty high, over 40°C (110°F), but after turning the Fan on, the T10 lowered in only 20 minutes the temperature to 30°C (86°F), keeping it always working for hours at the same temperature. (I used smart mode) If you spend hundreds of USD in your receiver, i suggest to invest 129 USD in this product for making your receiver works properly, under good temperature levels and finally extending the life of your receiver. Finally, for me this device worths every single dollar.

[>-86 dB] This receiver has revitalized my 1980s stereo system by allowing Bluetooth transfer from my Sony Walkman (CD quality) and from an iPhone. When powered the receiver goes into pairing mode--your device remembers this receiver...you are connected. So far there has been no problem with connection or distance from the receiver. As this is my second unit (first attached to another stereo system) I only wish I could rename the unit as it comes up with the same name...only to be identified by the Bluetooth address. If you only have one of these, this will not be an issue. Attachment is simple: connect using RCA supplied cord to your receiver aux input. Having it on a switched plug on the receiver is very convenient. If not, you would have to push the light button to switch it into on mode. It has an auto off after a few minutes of not receiving a signal. It also has an optical connection.

[Yes] Used as a patch cable to connect Wireless Mic receiver to a mixer board. I was concerned about the quality given the very low price, but no issues, and no visible signs of shortchanging on quality. Thanks to B&H for carrying such a great value!

[Passive] Pyle direct box was just what I needed to interface between my wireless mic receiver and mixing board to eliminate ground problems. works great

[1x 4-Pin Pump] I bought two of these one for myself and my wife. She's using the wireless NIC and its working great for gaming. I've tested the bluetooth functions with a custom bluetooth keyboard and it worked as expected. Primary purpose for buying this board was to get the flash bios button since I bought a ryzen 5 5600g which is only supported by the board after an update. worked fine following the instructions from random youtuber and confirmed by msi documentation. I also really appreciate that it has a built in display port in addition to hdmi. if you are buying an APU ryzen chip (the ones with graphics integrated) the display port feature is really nice to make full use of the power you are getting. the layout of the plugs on the board also works really nicely. my wifes case is a full gaming rig size with intense cable management and it looks spiffy in there. my case is for mini-ATX boards and doesn't have a lot of room by design, I was still able to get amazing airflow even with a huge graphics card and filling every sata port with power connections. uefi/bios menu is as expected with the usual stuff, boots fast, runs silent. great board so far. thanks MSI! and thanks B&H!

[6.85 x 4 x 2.9"] The Zoom LiveTrak L-20 was everything we hoped in a mixer and multitrack recorder. I've only had it a week, but our band has changed our entire sound system around it. Having 6 independent monitor-outs, each with its own full set of input sliders has been a boon, though it did take a while to get used to making changes at the board. The sound is crystal clear (except for Frank's noisy pedals, lol) Multitrack recording onto an SD card has been a game changer, especially since I can select WHICH channels are recorded. It has a smaller footprint than my previous board which is also nice. I haven't used the iPad app a ton, but it was one of the attractive extra features, so I bought the bluetooth module. I was able to change monitor levels on the fly.  Improvements I'd like to see: I would rather this have been a Bluetooth+WiFi device instead of Bluetooth, especially if you're going to sell the wireless separately. That way, we'd have more options for improving range... configure the device using bluetooth, but use it live on WiFi. You never know what kind of distance or interference you're going to encounter at a gig. Also, selling the bluetooth module separately seems like a very cheap move at this price point. But a separate module means they -could- create a WiFi module, right? I wish the iPad app was designed a little tighter so I could see more on the screen at a time.  It would also be nice if the monitor output ports were staggered like the channel inputs so you could fit two of the popular direct plug (Like Xvive) wireless monitor transmitters next to each other. But overall, this mixer is awesome and does everything we wanted in a single device - 16 channels of instrument and mic inputs, digital multitrack recording and 6 independent monitor outputs. And I got a GREAT price from B&H Photo!

[20 Hz - 20kHz] I use the Aluratek ABC02F Universal Bluetooth Audio Receiver and Transmitter connected to the Optical Audio output on my Sony TV. It pairs with a set of Sony Bluetooth earbuds to provide a separate channel for audio for my aging ears while the TV's audio continues to function independently for the rest of the family. The optical connection to the TV was simple and the ABC02F paired quickly and easily to the Sony Earbuds. The ABC02F is plugged into a USB port on the TV and is always on so the earbuds are reconnected within the time it takes to remove them from their charger/case and insert them into the ear.

[4096] Purchased this mouse for use with my Surface Pro so that the USB port would not be in use for the receiver of a regular USB mouse. Bluetooth pairing worked fine. Downloaded the Microsoft Mouse and Keyboard Center for additional customization. The mouse is small enough to carry with me and there is no risk of lost or mismatched receivers. The feel is great for a small mouse and the scroll wheel is responsive.

[12 VDC, 570 mA] I used this box to interface an on-stage Bluetooth audio receiver to the sound system at a week-long conference. It worked great and didn't have any issues!