6.5 Speaker Mounting Bracket

One of these brackets was purchased to mount a center speakers above a TV. Bose included all the hardware to mount this easily adjustable bracket including plastic anchors for masonry walls, screws for wood stud mounting and "butterfly" toggle mounting on gypsum (drywall) walls when hitting the stud isn't possible. A small metal, rectangular backing plate with four mounting holes is provided to mount the small, but heavy speakers. The bracket, like Bose speakers, is high quality and includes a couple of adapter pieces to accommodate vertical or horizontal speakers. There is also provided an adapter piece that snaps onto the back of the speaker. This pieces allows you to fully mount the metal plate and set the vertical and horizontal angle of the bracket without you needing to support the weight of the speaker while tightening the single adjustment screw. Before mounting the speaker, a small decorative piece covers the backing plate. There is even thought given to routing the speaker wire through the bracket and into the speaker with small notches and a hole through which you use the Bose style speaker-wire termination plug. Picture instructions are provided for the numerous styles of vertical and horizontal Bose center, front and surround speakers speakers. Of note, the butterfly toggles provided require 1/2" holes. I would guess most home owners/DIY folks have 3/8" cordless or corded drills. This makes it necessary to carefully enlarge the holes in the gypsum just the tiniest bit to insert the toggles. However the screws provided with the toggle are long enough to adjust for 1/2" or 5/8" thick gypsum and perhaps even thicker plaster installations. Keep in mind this bracket is intended for use with Bose speakers and cannot, or at least not easily, be used with non Bose speakers. When complete, the speaker mount is professional looking, matching Bose speakers.

[0.78 lb] If your going to mount 100 pd speakers high on a wall, the ramifications of the mount failing could be quite serious. Don't mess around. These wall mounts assembled easily and the attachment to the wall is made stronger with 4 mounting holes in the bracket. The mounting pivot has a clever design, in that after positioning the speaker on the mount, a turn of a screw causes it to expand so the speaker becomes part of the bracket and cannot come off. Heavy steel construction. I mounted some Yamaha S115v's and I'm confident they won't come down unless I want them too.

If your going to mount 100 pd speakers high on a wall, the ramifications of the mount failing could be quite serious. Don't mess around. These wall mounts assembled easily and the attachment to the wall is made stronger with 4 mounting holes in the bracket. The mounting pivot has a clever design, in that after positioning the speaker on the mount, a turn of a screw causes it to expand so the speaker becomes part of the bracket and cannot come off. Heavy steel construction. I mounted some Yamaha S115v's and I'm confident they won't come down unless I want them too.

[None] One of these brackets was purchased to mount a center speakers above a TV. Bose included all the hardware to mount this easily adjustable bracket including plastic anchors for masonry walls, screws for wood stud mounting and "butterfly" toggle mounting on gypsum (drywall) walls when hitting the stud isn't possible. A small metal, rectangular backing plate with four mounting holes is provided to mount the small, but heavy speakers. The bracket, like Bose speakers, is high quality and includes a couple of adapter pieces to accommodate vertical or horizontal speakers. There is also provided an adapter piece that snaps onto the back of the speaker. This pieces allows you to fully mount the metal plate and set the vertical and horizontal angle of the bracket without you needing to support the weight of the speaker while tightening the single adjustment screw. Before mounting the speaker, a small decorative piece covers the backing plate. There is even thought given to routing the speaker wire through the bracket and into the speaker with small notches and a hole through which you use the Bose style speaker-wire termination plug. Picture instructions are provided for the numerous styles of vertical and horizontal Bose center, front and surround speakers speakers. Of note, the butterfly toggles provided require 1/2" holes. I would guess most home owners/DIY folks have 3/8" cordless or corded drills. This makes it necessary to carefully enlarge the holes in the gypsum just the tiniest bit to insert the toggles. However the screws provided with the toggle are long enough to adjust for 1/2" or 5/8" thick gypsum and perhaps even thicker plaster installations. Keep in mind this bracket is intended for use with Bose speakers and cannot, or at least not easily, be used with non Bose speakers. When complete, the speaker mount is professional looking, matching Bose speakers.

[Pan & Tilt Head] I got this for mounting my very heavy (6.5lb.) Sigma 150-600 lens on a Manfrotto monopod. It is perfect for this application. It will allow me to bring the big lens into places where carrying a heavy tripod is not possible. Panning action is a bit stiffer than I would like. For a monopod I would like a head that can be loosened up completely. But, the action is very smooth. It says quality in a loud voice.

[1x Each Side] Excellent bracket for mounting any of tthe ELX soeakers.

[Khaki Tan/Beige] I stumbled across this item when I received my RRS L-Bracket. I was wondering what the hole in the bracket was for so I reviewed the specifications for the L-Bracket. I searched for QD on the RRS page and discovered the coolest mounting system I have ever seen. Peak Design comes close, but this QD mounting system doesn't leave unwanted hardware on your camera. The trade-off is you need an RRS bracket or equivalent for it to work where the PD can be secured on the camera strap mounts without additional hardware. I have tremendous trust that this mount will not fail as long as it is properly connected. RRS gear is not cheap and not inexpensive, but the saying buy once, cry once is particularly true with this item. I have no regrets buying this, and I think it is well worth the price.

[2x AA] MOUNTING BRACKET IS MUCH STRONGER THAN PREVIOUS MODEL

[1.05 lb] Where can I get a new mounting clip for speaker to stand mount?

MOUNTING BRACKET IS MUCH STRONGER THAN PREVIOUS MODEL