75 Tv Stand Mount

[Dolby Atmos] This is what my 75 inch TV, needed it!

[Steel] This mount is very well made, I mounted a 75” - 71lb tv on a sheetrock wall in a room that can have a couple of bad viewing angles based on the seating if the tv cannot be moved. The mount made it easy to get screws into the studs with the unit level and the set in the spot I needed it on the wall. I can now pull the set out and move it side to side, eliminating bad angles when I need to with absolutely no worries that the set is in any jeopardy, even with the arms fully extended. Very solid.

[4 (Lockable)] We bought this TV cart because we did not want to mount our 75 TV on the wall. The instructions were easy to follow and the only issue we had was finding the correct size bolts to attach the cart bracket to the back of our TV so that we could secure the TV to the cart. Once we got over this hurdle, we were able to finish the job and mount the TV. Would highly recommend this product to those who want another option to mount a TV.

[Tilt: 0 to 15°] [This review was collected as part of a promotion.] We got a 75” tv and have been deciding back and forth whether to mount it. Because it’s such a heavy tv, we wanted to get a nice mount for it so it will stay up and look nice. The mount is a sturdy and seems like it’s made with good quality materials. You definitely need someone also to help you mount the tv though. It tilts and makes it easy for people on the sofa to watch stuff. I really like this. Makes my house look even more amazing! If you’re wondering whether or not to get it, I would highly recommend it to do so. You don’t see the mount when you hang it up, it’s not super noticeable once you hang it up. But the mount is heavy, which I would hope so since the television is pretty heavy itself and needs to hold up it’s weight.

[Proprietary] Works great to mount a TV/Monitor on a lighting stand, or arm.

[Lead-Acid] I'm using this to backup our 75 inch TV. It's able to last 10 minutes which is plenty enough time to power down when the power goes out.

[Landscape] My tv is installed in a recessed space. With the new tv, I needed to install a full motion mount since the tv edge overhangs the recessed space. There was really only one stud to mount against so the Kanye PS400 worked great. I was able to level both the stand and the tv with the setup. Package includes all the bolts you might need. Only concern is the lower stand mount is a elongated hole to allow leveling but also allows the stand to tilt if too much torque is applied to the stand. However, I have the bolt tight enough enough to hail and not damage the stud.

[This review was collected as part of a promotion.] This is such a beautiful and stunning TV stand. If you are into euro/Scandinavian design and mid century modern, this stand/mount is for you. It's similar to an easel or chalkboard for the modern age. You would almost see this in a fancy classroom or conference room. It matches my decor perfectly. It was very easy to set up and mount the TV, but I have a lot of experience doing this sort of thing. Overall. this one is a winner.

[0.12" / 3 mm] I bought two of these to attach a TV/monitor mount to a speaker stand. These are very well-made, sturdy, and inexpensive pieces of hardware. I'm sure I'll think of more uses for them now that I know how handy they are.

[Steel] I received the package in perfect condition. Everything inside the box has its own separate box so nothing gets scratched. I also included pictures with this review that can be very useful to you. Make sure to check them out. You will need a desktop browser to see them. Assembling the TV bracket to the stand, all it takes are 6 screws... DONE! Then obviously another 4 to mount the brackets on the actual TV VESA mount. In the package, it comes with every screw size and spacers you can imagine or need.  Make sure you choose the right screw for proper DEPTH. Before mounting the VESA brackets on the TV with everything, FIRST, insert and tighten just the screw alone / itself by hand to make sure it is the correct depth. If the screw doesn’t hit the bottom of the TV’s threads, that’s the correct screw. Then, proceed with mounting the bracket on the TV. Stability: I mounted a 50” LED TV and the stand doesn’t even feel the load. The tripod is all metal and very solid. So is the TV bracket. The only plastic there is, is the tightening knob on the stand, which, every DJ speaker stand or similar stands like this have the same plastic parts on locking the stand or pole. It will lock the legs in place just fine. No need to over tighten.  Again, stability and gravity physics: Make sure you open the stand’s legs at its WIDEST setting and make sure the front leg aligns with the TV. This applies to any camera tripod, speaker stand including this item. I often see many people doing this wrong, especially beginners. Speaking of DJ speaker stands, the Helder FPTM-70 stand features the same diameter pole to mount a DJ speaker, so, If you want to occasionally switch from a TV stand / DJ speaker stand you can. For the price, this stand is solid and does its job perfectly. What else could I say? [I have received this product in exchange for my honest review]