8 Pin Bluetooth Receiver

[1.0 lb (0.4 kg)] Very good Bluetooth receiver.

[>-86 dB] This receiver has revitalized my 1980s stereo system by allowing Bluetooth transfer from my Sony Walkman (CD quality) and from an iPhone. When powered the receiver goes into pairing mode--your device remembers this receiver...you are connected. So far there has been no problem with connection or distance from the receiver. As this is my second unit (first attached to another stereo system) I only wish I could rename the unit as it comes up with the same name...only to be identified by the Bluetooth address. If you only have one of these, this will not be an issue. Attachment is simple: connect using RCA supplied cord to your receiver aux input. Having it on a switched plug on the receiver is very convenient. If not, you would have to push the light button to switch it into on mode. It has an auto off after a few minutes of not receiving a signal. It also has an optical connection.

[Aluminum, Steel] This is basically a cardellini that has an extra baby pin receiver on one end. If you're familiar with cardellinis, this one is as good as any I've used. If you've never used one, it'll clamp just about anything to just about anything else! Much more secure than a mafer (especially on flat surfaces). ONE MINOR CON --- They're so nice, they seem to disappear from set more often than other items!!!

[1.285 lb] The depth in this 9.Solutions VESA mount is as minimal as it can get, and for that, I absolutely love it. Worth the money. The ones Ive been buying for the past decade have a 2 pin in the back that have to go into a receiver on the C-stand, which all pretty much adds up to the same overall cost.  The benefit of this low-profile, minimal depth mount are:  1) easy to pack any monitor with it in a flight case (easier mobility), 2) its inherently mounted on a stand at a perpendicular angle, and if thats not what I want, its easy to mount to the C-stand receiver tools that I would have been using anyway for the alternative mounts that I have (with the long pin in the back), then moveable in any direction of my choosing, 3) its sturdy and well-made, even, something few would likely notice, the provided M5 screws are high-end. For most monitors, this is an easy screw on and done deal... but, there are some monitors with recessed VESA mounting screw areas which will need a couple of smartly sized washers to provide stability beyond the recessed space and might need longer non-high-end M5 screws that only cost a couple of bucks. If I could trade in all my VESA mounts so that theyd all be this 9.Solutions VESA mount, I would do it in a heartbeat. Im that impressed, and have no hesitation in making this recommendation to others.

[5/8" Stud] Slim, strong Cardellini w/ bonus hex baby pin receiver built in One of the better Kupo products. I have the 9 and 4 - both get lots of use.

[Camera] Remote worked exactly as described. I plugged in the 10-pin transmitter and paired it with the receiver and immediately started taking pictures. If you need a remote for your Nikon that has a 10-pin connection, this is the remote you need. It works with my D4 and my D850.

[Silver] Exactly what I needed to convert my c-stand turtle base junior receiver into a low baby pin light stand. You can feel the quality of this pin in its weight.

[0.425 lb] This is a well made product! It has a baby pin receiver on one side and 3/8" male ball head or any tripod head with flat base. Also, you can drop this into junior pin receiver in heavy stands!

The depth in this 9.Solutions VESA mount is as minimal as it can get, and for that, I absolutely love it. Worth the money. The ones Ive been buying for the past decade have a 2 pin in the back that have to go into a receiver on the C-stand, which all pretty much adds up to the same overall cost.  The benefit of this low-profile, minimal depth mount are:  1) easy to pack any monitor with it in a flight case (easier mobility), 2) its inherently mounted on a stand at a perpendicular angle, and if thats not what I want, its easy to mount to the C-stand receiver tools that I would have been using anyway for the alternative mounts that I have (with the long pin in the back), then moveable in any direction of my choosing, 3) its sturdy and well-made, even, something few would likely notice, the provided M5 screws are high-end. For most monitors, this is an easy screw on and done deal... but, there are some monitors with recessed VESA mounting screw areas which will need a couple of smartly sized washers to provide stability beyond the recessed space and might need longer non-high-end M5 screws that only cost a couple of bucks. If I could trade in all my VESA mounts so that theyd all be this 9.Solutions VESA mount, I would do it in a heartbeat. Im that impressed, and have no hesitation in making this recommendation to others.

[25 lb / 11.3 kg] Truth in advertising, the stand is low and mighty, it's well built and the fact it has both a junior receiver and a baby pin is a plus. This is the second Kupo stand I've purchased and I will be buying more.