8 Way Hdmi Splitter Over Ethernet

[18 Gb/s] It's an HDMI splitter. Does exactly what you would expect. No complaints.

[1/3 RU wide] This unit is great for getting 2 channels of audio into your Dante network. Just be sure you have Power Over Ethernet, either from your switch or from an injector, and off you go!

[15.2 W] Very small but useful high-quality HDMI splitter with very high-quality 4K UHD screen quality

[30 Hz] Needed an HDMI splitter that could specifically take a 1080 / 24p signal from an Avid via BlackMagic output and duplicate it for two screens simultaneously. It seems to work as I need it two. The two screens are maybe a few milliseconds apart in terms of sync but that could also be a product of the internals of each monitor, as one is a television and the other is a Ben Q 2700U. Anyway, happy to recommend this device!

[Video: 165 MHz] This HDMI Splitter does exactly what it is supposed to do: it takes the digital video AND audio and makes two exact copies of BOTH the video and Audio. It is not unusual to find an HDMI splitter that can duplicate the digital video. But this will also duplicate the audio. Full 7.1 audio in both outputs. Get this one!

[6' / 1.8 m] I have a full camera rig setup for the Blackmagic Pocket Cinema Camera 6k. The dual swivel on both ends of this HDMI cable makes it ideal for cable management, especially when the HDMI port for the field monitor is on the left side and the monitor it is mounted to the left of the camera/lens. You can wrap the cable flush against the surface of the monitor and don't have to worry as much about damaging the HDMI port on the camera or monitor if the cable gets accidentally jerked. I have several of these cables now. One runs from the camera to a 4-port powered HDMI splitter and then from the splitter to the viewfinder, focus monitor and wireless transmitters.

[Metal] Amazing high-quality HDMI splitter from one screen to two screens still stays high-quality resolution and simple to use would definitely recommend!

[2.0' (0.6 m)] 1/17/2024 To ALL OF YOU I use this KanexPro 1x2 HDMI Splitter on the on-camera monitor on the monitor of the computer screen with a both HDMI cable from the NIKON D3200 DSLR camera's output to the front of an HDMI splitter to the on-camera monitor and the computer monitor, they are both work perfect, even there's NO problems AT ALL with them. This is my favorite hobby is audio/video post-production about making a film/video.

[24-Bit] I bought the Avinair Spitfire Pro 1x2 HDMI Splitter to run HDMI cables from my camera to 2 tv monitors for audience viewing. Works great for that purpose.

[FCC, RoHS] I bought this specifically to do away with swapping HDMI cables between the living room TV and the bedroom for the DirecTV box. Well, the splitter was trivially easy to install -- just connect the cables and wall wart power supply. Now, we can watch whatever is playing on the DirecTV box on either TV or both at the same time. Plus, I have two more ports for future expansion. The splitter appears entirely transparent, with both TVs showing no degradation in audio or video. I'm happy!