At&T Wireless Gateway Router

[52 W] I plugged in one of the router outputs from my AT&T wireless gateway and distributed it to wall jacks and 2 Ubiquiti UniFi AC Pro access points (also bought from B&H) via PoE and everything just worked. Not sure why I waited so long to do this.

[WPA, WPA2, WPA3] Just installed in my house. As compared to the standard COX Panoramic WiFi, AT&T Arris, Linksys E4200, & Motorola NVG589 routers, this solution way outperforms anything I have ever had in my house. It even way outperforms my Linksys E6800 AC1750 Wireless Range Extender solution. All three mesh devices were configured as AP's Access Points, and hardwired ethernet to the primary AT&T U-verse Arris Router. I turned off all WiFi from the AT&T Arris Router and only used the 2.4G & 5G WiFi from the TP-Link Mesh Devices. I thought about using the DHCP routing functions from the TP-Link Mesh, but I needed a few more ethernet ports on them. I also have my AT&T Router connected to two 32-port switches which provide Hardwired Ethernet connections throughout my house. There are about 40 hardwired devices and 20 WiFi devices at this location. I try to keep most of devices hardwired due to better dependability and faster connection speed. Maybe there is a better way, but his is working very well for me now. No more WiFi no-connection and low speed issues throughout my house. From now on I will always recommend a Mesh solution. And this product is a very good solution.

[4] So far so good. Big improvement over AT&T supplied router with improved coverage and speed.

[Yes] I live in apartments and there is around like 30 to 50 others AT&T wireless routers. With cheaper ubiquity models I always had like 25 of 50 Megabits/sec top. With that one I always have stable 50 no matter what. Feels like I'm using an ethernet.

[LCD] This router works well with other Ubiquity Unifi devices including managed switches, wireless access points and network extenders. This router is fast. The self hosted server app works well on a Windows 10 pc. What isn't clear from the product description or BHP tech support is that the 2.5 GB ports adapt to 1 GB connections and that this router can replace an older Ubiquity UniFi router by plug and play. All that is needed, is to replace the new router on the gateway connection and adopt the device. Once you adopt the new router you get a message saying you can't have 2 gateways. Then just go and forget/remove the old gateway router from the app and re-adopt the new gateway router. Give it a bit of time and all the settings will be automatically applied to the new router. I have a xfinity cable modem, UniFi gateway router, 2 UniFi 8 port managed switched, 1 UniFi WAP, 2 UniFi Beacon wireless network extenders and about 50 network devices managed with a fixed ip setup. My only complaint is that nobody at BHP or Ubiquity could give me a straight answer on upgrading the router.

This router works well with other Ubiquity Unifi devices including managed switches, wireless access points and network extenders. This router is fast. The self hosted server app works well on a Windows 10 pc. What isn't clear from the product description or BHP tech support is that the 2.5 GB ports adapt to 1 GB connections and that this router can replace an older Ubiquity UniFi router by plug and play. All that is needed, is to replace the new router on the gateway connection and adopt the device. Once you adopt the new router you get a message saying you can't have 2 gateways. Then just go and forget/remove the old gateway router from the app and re-adopt the new gateway router. Give it a bit of time and all the settings will be automatically applied to the new router. I have a xfinity cable modem, UniFi gateway router, 2 UniFi 8 port managed switched, 1 UniFi WAP, 2 UniFi Beacon wireless network extenders and about 50 network devices managed with a fixed ip setup. My only complaint is that nobody at BHP or Ubiquity could give me a straight answer on upgrading the router.

[7.685 lb] It's compact size makes it a perfect fit to provide backup power to the AT&T ONT in the data cabinet.

[Bluetooth 3.0 ] Had our home number of 29 years ported to Ooma. Our VOIP phone service from AT&T was $50/month and limited to 200 minutes. Ooma warned us to separate your phone and Internet service with a dry-loop connection if you have DSL Internet service. However, upon doing more research, I learned that if you have a newer version of DSL (called VDSL2 of ADSL2+), this is not necessary. We took a chance and didn't bother calling AT&T to go through the confusing process of setting up dry-loop DSL. Our number ported over just fine in about a week and Ooma kept us updated with an exact date. The Ooma hardware is very solid and works as it should, so far. We got the Ooma Telos and 3 HD3 handsets, and the audio quality of the handsets is very good. Our new monthly cost is local taxes only, which is just below $7. Highly recommended.

[Submersible] You can feel the quality of this phone when it's in your hand, then the pictures and videos when you start shooting with it, just as easy and familiar as my Sony RX 100 VI Camera but plus a smart phone. No problem connecting to AT&T 5G through Cell Booster they provided for free (got to have a new AT&T 5G Sim card, it's also free) , always get 5 bar LTE signal at home within 3000 Sq.feet. If you already have Sony TV,Lap top.. got to have this phone to make your system complete. Nice.

[3.39 lb] Got AT&T fiber over a year ago and bought an Edgerouter Lite.� While it performed decent it was slow at times and not quite able to keep up with a household of 3 power users.� After replacing it with the ER-4 we have noticed significant improvements not only in our network but also with being able to manage the router.