Audio Cable Bluetooth Transmitter

[Bluetooth] When teamed with a BlueSENSE Bluetooth audio transmitter, I've got great sound anywhere in my house. Easy to set up and great sound with my Yamaha receiver and CD player!

[5.3 VDC, 150 mA] Simple, reliable, and solid. I havent used the audio piece but everything else has been perfect. It would help if this could use one cable between transmitter and receiver but it has worked great as it is.

[1 TB] This works well, long range but needs (more or less) to have direct line of site - did not work well when around the corner from the bluetooth transmitter device. Also, the XLR output on this device is line level out but the XLR input on most audio boards is mic level. Use a XLR (f) to 1/4 (m) adapter cable to go from this device into the line (1/4) input on your audio board. This will also free up some space on your board is this unit is somewhat bulky to plug in directly. Also, using an adapter cable can allow you to position this device better to be line of sight to the transmitter.

Simple, reliable, and solid. I havent used the audio piece but everything else has been perfect. It would help if this could use one cable between transmitter and receiver but it has worked great as it is.

[20 W (Typical)] I need a Bluetooth transmitter so I can watch my shows at night without disturbing anyone. This device bears the Sennheiser label and while likely not actually manufactured by the famous German pro-audio company, it is still a reassuring logo, and so far it is living up to it. It will accept either digital input (via standard Toslink - cable included) or analog (via stereo 3.5 mm mini plug (also included). Also included is a USB power cable, but not the wall wart power supply (you've got plenty of them around by now.) Installation is easy, once you determine which audio output from your source is appropriate. This might be easier if you use the analog option, which might require a 1/4 to mini adapter to use the headphone output on many home systems. Bluetooth synced up to my headphones seamlessly and all is well. My own installation was a bit more complicated because I'm using an HDMI Audio Extractor box for the source. (Not made by Sennheiser.) Sound quality seems quite good through my Bose Bluetooth headphones; there is plenty of level available. When using a device like this there will always be latency as the sound is converted to Bluetooth. It is perceivable but if you can deal with lip sync that is a little rubbery it is acceptable - and unavoidable. Just be sure the loudspeakers are off. So far, with only about an hour of use, this is a product I would recommend.

[6.5' / 2 m] I'm using this to connect my rear projector and sound system wirelessly. I was using so far bluetooth based transmitter receiver which was providing low sound quality lagging and breaking. This one works simply out of the box, no setup needed, and quality is high. The only down side is that some simple audio connectors are missing, but I used those of my previous set.

[Plastic] I love this bluetooth transmitter! I lets me use ANY device with an earphone jack to play good music through my good sounding bluetooth speaker. It reconnects automatically too, so all I have to do is turn the devices on and listen. Kudos!

[CT7302] Highly versatile and compact Bluetooth Receiver/Transmitter with built-in DAC. It has separate optical input and outputs and a dual-use coax line. The Bluetooth connectivity is solid but it might take a few tries with older Bluetooth equipment. Once you're connected, it stays connected. Highly recommended!

[>70 dB] Paired easily to my bluetooth transmitter then paired to my other Philips speaker very easily. Good range and great sound

Paired easily to my bluetooth transmitter then paired to my other Philips speaker very easily. Good range and great sound