Black Magic Micro Usb Cable

[Sony E] Use for black magic micro. Its great

[2] I use it with a Black Magic with monitor, recorder and a Zacuto rig with Redrock Micro follow focus, 12 volt pag batteries. The head is smooth and the balance can be easily performed. The gear is solid enough for what is is used for, light to carry and can be quickly installed. The bubble with inner light is a plus.

[Metal] The Citrix ef m2Ii canon ef to micro 4/3 adalpter fits my black magic cinema camera 4K perfectly . Luv it . What a bargain!

[Black] The Metabones Speed Booster is a must have for the BLACK MAGIC 2.5K and the pocket camera with the Micro-4/3 mount. The optics are framed closer and the aperture is better for light. This Metabones adapter gives me the ability to use Nikon mount lenses that are non-manual which is a huge plus! It is a crucial part of my BMC 2.5k rig.

[0.03 lb] Needed this for charging from a micro-USB cable. Works great for that.

I have another review that I wrote about this mic, but B&H's website doesn't appear to let me update that review. I've now been using this mic almost daily for over a year. The audio is crisp and clear, background noise is kept to a minimum, and people on the other end of the meeting/phone call give compliments on the detail that this mic captures. I used to use a condenser mic, but that also had the annoying feature of picking up a lot of 60Hz hum. This mic doesn't do that and I didn't have to make any adjustments to the room either. For the person who mentioned they couldn't fit it in a shockmount, it has one internally. That is why the mic is the size that it is. For those complaining about the USB port, mine hasn't had any issues. I accidentally bent the micro usb connector on the cheap cable they shipped with it and the mic survived just fine. The cable, on the other hand, was useless after that. I solved this problem by finding a 90 degree USB adapter so that the connector isn't pointing straight out the back of the mic. It now sits mostly flush and swiveling the mic is more likely to cause the adapter to disconnect at the other end. If your laptop, like mine, is usb-c only, don't try to buy long usb-c to usb-c cables. They are crazy expensive. Instead, try to buy a usb-c to mini or micro usb-b cable. They are much cheaper. My setup is usb-c to micro usb (10 feet), then an adapter from micro-usb to usb-c (1 inch), and then finally a short usb-c to 90 degree micro-usb adapter (6 inches).

[Cardioid] I have another review that I wrote about this mic, but B&H's website doesn't appear to let me update that review. I've now been using this mic almost daily for over a year. The audio is crisp and clear, background noise is kept to a minimum, and people on the other end of the meeting/phone call give compliments on the detail that this mic captures. I used to use a condenser mic, but that also had the annoying feature of picking up a lot of 60Hz hum. This mic doesn't do that and I didn't have to make any adjustments to the room either. For the person who mentioned they couldn't fit it in a shockmount, it has one internally. That is why the mic is the size that it is. For those complaining about the USB port, mine hasn't had any issues. I accidentally bent the micro usb connector on the cheap cable they shipped with it and the mic survived just fine. The cable, on the other hand, was useless after that. I solved this problem by finding a 90 degree USB adapter so that the connector isn't pointing straight out the back of the mic. It now sits mostly flush and swiveling the mic is more likely to cause the adapter to disconnect at the other end. If your laptop, like mine, is usb-c only, don't try to buy long usb-c to usb-c cables. They are crazy expensive. Instead, try to buy a usb-c to mini or micro usb-b cable. They are much cheaper. My setup is usb-c to micro usb (10 feet), then an adapter from micro-usb to usb-c (1 inch), and then finally a short usb-c to 90 degree micro-usb adapter (6 inches).

[0 to 90%] Black magic stuff works .

[0.51 lb] Works very well with my Black Magic Assist.

[16] I purchased the front 3G-SDI cable of the Black Magic Design URSA mini to divide it into two. It worked well without any problems with the output without connecting the power. The quality of the product looks high. It was also small, so it was easy to fix it with double-sided tape on the cheese plate on the side of the camera. It's a really good product.