Bluetooth Antenna For Stereo Receiver

[>-86 dB] This receiver has revitalized my 1980s stereo system by allowing Bluetooth transfer from my Sony Walkman (CD quality) and from an iPhone. When powered the receiver goes into pairing mode--your device remembers this receiver...you are connected. So far there has been no problem with connection or distance from the receiver. As this is my second unit (first attached to another stereo system) I only wish I could rename the unit as it comes up with the same name...only to be identified by the Bluetooth address. If you only have one of these, this will not be an issue. Attachment is simple: connect using RCA supplied cord to your receiver aux input. Having it on a switched plug on the receiver is very convenient. If not, you would have to push the light button to switch it into on mode. It has an auto off after a few minutes of not receiving a signal. It also has an optical connection.

[Glass] enables me to send my Apple Music from my phone to my older stereo receiver which is pre Bluetooth.

[> 70 dB ] The best stereo receiver I’ve ever owned! If you want the best, this is it!

[1.0 lb (0.4 kg)] Very good Bluetooth receiver.

Its a perfect OEM replacement SMA antenna for Lectrosonics SRB5P receiver.

[0.07 lb] Its a perfect OEM replacement SMA antenna for Lectrosonics SRB5P receiver.

[3 V RMS] Needed an easy fix for my antenna and here it is! The placement within the receiver was a little tight... for big hands. But it worked out!

[White] We were having reception problems using the built in antennas on our receiver until we attached this antenna. We went from having less than 50' of range to successfully testing at over 300'. Well worth the very reasonable cost.

[1-Year ] I got my hands on the DJI transmitter and receiver and tested it for a few days. Really ran it's through it's paces and tried to lose signal. It performed very well. However, if I ever wanted to expand my wireless network by renting more receivers, I'd be screwed in my area cause no one has the DJI setup. Teradek's Bolt 6 has been a major upgrade from the previous generations of Teradeks I've used over the years and I really like their build quality. Very solid and the antenna protection is a very nice touch. As long as you aren't trying any funny business with the antenna and keep them propped vertical (unless you change to a few H antenna) it works really well. All in all, I DID obviously go with Teradek but they should be mindful as the DJI setup is great too. But I went with the Teradek because it's proven and expandable with rentals in my area. Picture uploaded is my transmitter on it's maiden voyage on a Sony FX3 build.

[4 x 2 x 0.01"] I retrofitted the antenna on the Sennheiser EW-G4 receiver with this antenna by replacing the existing antenna with an SMA female connector. The antenna is trimmed to the required length for my frequency range being used. The antenna is made with steel multi-braid surrounded by a flexible and durable rubber. Now I can position the antenna vertically when the receiver mounted on the top of my recorder.