Bluetooth Audio Receiver For Car Stereo

[>-86 dB] This receiver has revitalized my 1980s stereo system by allowing Bluetooth transfer from my Sony Walkman (CD quality) and from an iPhone. When powered the receiver goes into pairing mode--your device remembers this receiver...you are connected. So far there has been no problem with connection or distance from the receiver. As this is my second unit (first attached to another stereo system) I only wish I could rename the unit as it comes up with the same name...only to be identified by the Bluetooth address. If you only have one of these, this will not be an issue. Attachment is simple: connect using RCA supplied cord to your receiver aux input. Having it on a switched plug on the receiver is very convenient. If not, you would have to push the light button to switch it into on mode. It has an auto off after a few minutes of not receiving a signal. It also has an optical connection.

[20 Hz - 20kHz] I use the Aluratek ABC02F Universal Bluetooth Audio Receiver and Transmitter connected to the Optical Audio output on my Sony TV. It pairs with a set of Sony Bluetooth earbuds to provide a separate channel for audio for my aging ears while the TV's audio continues to function independently for the rest of the family. The optical connection to the TV was simple and the ABC02F paired quickly and easily to the Sony Earbuds. The ABC02F is plugged into a USB port on the TV and is always on so the earbuds are reconnected within the time it takes to remove them from their charger/case and insert them into the ear.

[Glass] enables me to send my Apple Music from my phone to my older stereo receiver which is pre Bluetooth.

[> 70 dB ] The best stereo receiver I’ve ever owned! If you want the best, this is it!

[Nickel] Worked perfectly to transfer stereo audio from a computer to a stereo receiver. Also required a mini stereo female RCA to L&R male RCA jack adapter. Used for playing on-line music.

[Rean] this works great with my wireless lav receiver that combines 2 channels of audio into a stereo output. This cable isolates the two channels so I can record the channels separately into a recorder.

[Gray / Blue] After my stereo receiver died, I needed a way to play my old vinyl music. I got this preamp to connect my turntable to my PA System! So now it's nice and loud, and full sounding. Note: You still will need to ground your turntable to your audio power chassis, or you'll hear hum. Remedy: Wire audio ground wire (not power ground) up to a screw on the back of your audio system.

[12 VDC, 570 mA] I used this box to interface an on-stage Bluetooth audio receiver to the sound system at a week-long conference. It worked great and didn't have any issues!

[1.0 lb (0.4 kg)] Very good Bluetooth receiver.

[0.635 lb] Easily paired with phone and gives me bluetooth in my car