Bluetooth Clip Microphone

[Green] Serves its purpose! Works exactly as described! Just wish it came with a microphone clip.

[0.085 lb] This clip was a replacement for one that became inadvertently detached from its microphone. This one is much better; has a better grip. I bought two just in case.

[18 dBm] The Go blu is great for portable use. It matches well with my LETSHUOER S12 Pro IEMs. It has a livelier sound than DAPs I've used. I use my Pixel 7 running Plexamp. I connect using LDAC to the Go Blu. Then I use a Balanced connection from the Go blu to my IEMs. I've experienced no Noise/hiss using the balanced connection. If you're concerned about the no clip issue B&H sells iFi's Go blu leather case with the integrated clip. I've also tried the Go blu with easy to drive headphones and it did fine. I haven't tested the bluetooth distance, but with the phone near me I never loose conections. I have rarely noticed a skip but since I'm streaming music from my NAS to Plexamp on my phone, then using bluetooth to the unit, who's to know what causes that. It might even be the files. Overall, I'm very impressed with the Go blu. It turns almost any headphone into a bluetooth headphone.

The Go blu is great for portable use. It matches well with my LETSHUOER S12 Pro IEMs. It has a livelier sound than DAPs I've used. I use my Pixel 7 running Plexamp. I connect using LDAC to the Go Blu. Then I use a Balanced connection from the Go blu to my IEMs. I've experienced no Noise/hiss using the balanced connection. If you're concerned about the no clip issue B&H sells iFi's Go blu leather case with the integrated clip. I've also tried the Go blu with easy to drive headphones and it did fine. I haven't tested the bluetooth distance, but with the phone near me I never loose conections. I have rarely noticed a skip but since I'm streaming music from my NAS to Plexamp on my phone, then using bluetooth to the unit, who's to know what causes that. It might even be the files. Overall, I'm very impressed with the Go blu. It turns almost any headphone into a bluetooth headphone.

[0.265 lb] Excellent product with thoughtful features, including clip to hold Bluetooth remote trigger. Solid mechanical action with secure attachment. Compact so easy to carry.

Excellent product with thoughtful features, including clip to hold Bluetooth remote trigger. Solid mechanical action with secure attachment. Compact so easy to carry.

I am a professional Audio Engineer working in the television industry. Discreet microphones (and their cords!!) are a necessity. The design of this clip is genius. It holds the stress loop and cord in place, which makes placing the microphone on your Talent very fast and efficient. No fumbling around trying to catch the cord in the back of the clip anymore!! Also, equally as noteworthy, it rotates!! Placing a microphone on clothing with a round neckline (Like a ladies blouse, or a t-shirt) can easily be accomplished! The design alone is why I give this 5 stars!! HOWEVER...there are a few things that need to be noted. The clip could be a little stronger. It does not hold tightly. But that being said...in some cases where your Talent will not be moving around, it is also a blessing that it is not stronger! It is so lightweight, that it can be used on delicate fabrics. Lastly, watch the cord dimensions when you are ordering this clip. (In other words, learn from my mistakes!!) It is available in 0.8-1.5mm and 1.5-2.5mm. The Sony ecm77 wired, and Shure WL-50 (used on older model ULX1 wireless bodypack) WILL NOT fit in the smaller (0.8-1.5mm) size clip. Since it is fairly obvious that I know this due to experiencing it, I will share a workaround!! I used a drill press and bored the opening a little larger, but that is a little time consuming! I also ordered the larger size and it fit perfectly. So in summary...I definitely recommend this clip. I will be purchasing a few more. It is a great, inexpensive clip. Just make sure that you have a heavier duty clip to use in situations where your talent will be standing, or moving around.

[Download] This is a much better product than the one that came with my Sony Wireless hand microphone. It even had a clip to put it on your belt.

[Tie Clip] I am a professional Audio Engineer working in the television industry. Discreet microphones (and their cords!!) are a necessity. The design of this clip is genius. It holds the stress loop and cord in place, which makes placing the microphone on your Talent very fast and efficient. No fumbling around trying to catch the cord in the back of the clip anymore!! Also, equally as noteworthy, it rotates!! Placing a microphone on clothing with a round neckline (Like a ladies blouse, or a t-shirt) can easily be accomplished! The design alone is why I give this 5 stars!! HOWEVER...there are a few things that need to be noted. The clip could be a little stronger. It does not hold tightly. But that being said...in some cases where your Talent will not be moving around, it is also a blessing that it is not stronger! It is so lightweight, that it can be used on delicate fabrics. Lastly, watch the cord dimensions when you are ordering this clip. (In other words, learn from my mistakes!!) It is available in 0.8-1.5mm and 1.5-2.5mm. The Sony ecm77 wired, and Shure WL-50 (used on older model ULX1 wireless bodypack) WILL NOT fit in the smaller (0.8-1.5mm) size clip. Since it is fairly obvious that I know this due to experiencing it, I will share a workaround!! I used a drill press and bored the opening a little larger, but that is a little time consuming! I also ordered the larger size and it fit perfectly. So in summary...I definitely recommend this clip. I will be purchasing a few more. It is a great, inexpensive clip. Just make sure that you have a heavier duty clip to use in situations where your talent will be standing, or moving around.

[5.15 lb] This was used with a Samson Expedition XP800 amp/mixer/speakers system for an all day event with about 100 people under a large tent. The system was easy to set up and connect with the XP800. The microphones worked very well. For the small microphone, you have the choice of clipping a lapel clip to it or a headset/boom. We used the lapel clip. Be sure to clip it near the center of the body for best pickup. Our first user clipped it a bit to the side, and every time he turned his head the other way, his voice trailed off. With it clipped to a shirt under the chin,, the pickup was remarkable and clear. The instructions state that the mics need AA alkaline batteries and they will last about 8 hours, and don't use rechargeable batteries. These mics were used a lot and did die after about 8 hours. Next time I would use Energizer Lithium batteries for a very long event. A couple of times the microphone popped off of the lapel clip when the speaker had muted their mic and was working with their hands and not paying attention. It clips back on easily.