Bluetooth Usb Headphone Adapter

[0.035 lb] A very functional USB-C headphone adapter. Works well. My 6th or so adapter.

[USB 2.0] Up until now, I could connect either a USB-audio headphone OR a USB-compliant MIDI keyboard to my USB-C iPad via a wired connection, but not both. This meant that one of the two – keyboard or headphone – had to be connected via Bluetooth. This is usually not a problem except when trying to record a live performance, where Bluetooth latency is frankly unacceptable. With the MiniFuse, however, both the keyboard and the headphone attach to the interface, and a single USB-C cable connects to the iPad. I have so many neat synth and other music creation apps on there that I can finally use live! This is HUGE for me. Note that the MiniFuse 4 supports up to 500 mA keyboards via its USB-hub, so long as it's plugged in, whereas the MiniFuse 2 supports only up to 250 mA devices, which cuts out most external USB-compliant MIDI keyboards. Yeah, it's a bit of a pain to have to plug the MiniFuse 4 to a wall socket to make it all work, but that's still just a single wire. Oh, also, I've connected some synths to the audio inputs, and I've been running both the headphone and main Audio outputs, as well as the loopback interface both with the iPad and my mac, and it all works and sounds fantastic. The manual takes a bit of careful reading to understand the possible routings (for me at least, I'm a newbie at this) but it's well written and I was able to figure it out pretty quickly. I didn't know I needed it, but now that I have the MiniFuse, I can't imagine not having it as the central hub to my synthesizer setup.

[USB-A ] Bluetooth pairs well with Windows or Linux on my laptop, and the USB adapter provides reliable fallback. The mouse fits my large hands, feels solid, and responds smoothly.

[2.3 lb / 1.1 kg] My significant other works from home and needed to replace her Polycom Voxbox, which has been malfunctioning when its warranty ended. Replaced it with the Jabra Speak 750. Even though the Speak 750 supports wired USB and Bluetooth, I used the USB adapter that came with 750 in order to establish full Teams control from the Speak 750. It has worked flawlessly with her Windows 10 Pro HP laptop. Note that I tried using Windows Bluetooth, but it did not have the range of Teams controls that the adapter provides. Plus, noise cancelling works fine, where even noise from the dish washer does not interrupt the call. The Speak 750 supports up to 10 Bluetooth-paired devices with 2 active simultaneously. In using the USB adapter, the iPhone that is paired with the 750 does not interrupt any Teams meetings if the iPhone receives a message or phone call. Finally, Jabra technical support was excellent. Had an issue with audio feedback, and after 10 minutes of wait, I was able to talk to a live, knowledgeable person and resolved the issue. Highly recommend the Speak 750!

[1x Handheld] It got Bluetooth. It got Aux. in and Headphone out. The sound is Great on it. It got so many nice Features. B&H is the BEST.

[-10 dB] Mic, Pre-Amp, and Headphone Amp in an all-in-one package! Nice to be able to use a USB mic without the need for a separate pre-amp. Really like the headphone jack incorporated into the unit with separate gain controls for the headphone volume.

[18 dBm] The Go blu is great for portable use. It matches well with my LETSHUOER S12 Pro IEMs. It has a livelier sound than DAPs I've used. I use my Pixel 7 running Plexamp. I connect using LDAC to the Go Blu. Then I use a Balanced connection from the Go blu to my IEMs. I've experienced no Noise/hiss using the balanced connection. If you're concerned about the no clip issue B&H sells iFi's Go blu leather case with the integrated clip. I've also tried the Go blu with easy to drive headphones and it did fine. I haven't tested the bluetooth distance, but with the phone near me I never loose conections. I have rarely noticed a skip but since I'm streaming music from my NAS to Plexamp on my phone, then using bluetooth to the unit, who's to know what causes that. It might even be the files. Overall, I'm very impressed with the Go blu. It turns almost any headphone into a bluetooth headphone.

[0.15 lb] I already have a pair of traditional wired ATH-M50X but decided to treat myself to the bluetooth version. They are basically the same headphone I already have, but without a cord. They do come with a cord, but it is quite short and isn't coiled. They come with a USB charging cord that is VERY short at about 14 inches. I find this a little too short, but it gets the job done. The instructions were a little TOO simple and consisted of just images and very little text. It was enough to get me started, but there was no information for any sort of troubleshooting. As this is my first bluetooth device, a little more information would have been helpful. The problem I had was once I connected with the transmitter that connects to my 'legacy' equipment, that was the sole device the headphone wanted to connect to. It took a little fiddling around to figure out how to get the headphone to connect to my laptop and cell phone. It would have been nice to have troubleshooting instructions. All that being said, the headphones sound as great as the wired version. I haven't had any problems with interference or a dropped signal. My house isn't very big so I can't really get out of range without going outside which I haven't tried yet to see how far the signal reaches. Great Headphones!!

The Go blu is great for portable use. It matches well with my LETSHUOER S12 Pro IEMs. It has a livelier sound than DAPs I've used. I use my Pixel 7 running Plexamp. I connect using LDAC to the Go Blu. Then I use a Balanced connection from the Go blu to my IEMs. I've experienced no Noise/hiss using the balanced connection. If you're concerned about the no clip issue B&H sells iFi's Go blu leather case with the integrated clip. I've also tried the Go blu with easy to drive headphones and it did fine. I haven't tested the bluetooth distance, but with the phone near me I never loose conections. I have rarely noticed a skip but since I'm streaming music from my NAS to Plexamp on my phone, then using bluetooth to the unit, who's to know what causes that. It might even be the files. Overall, I'm very impressed with the Go blu. It turns almost any headphone into a bluetooth headphone.

[USB-C] [This review was collected as part of a promotion.] Comfort and quality sounds while traveling. This being my first Bluetooth headphone made the experience even better. I enjoyed the ease of pairing on flights and how i could drown put the background noises. I would highly recommend, the quality woth JBL has never been a problem so i am looking forward to enjoying now and in the future.