Bodypack Transmitter Sennheiser

[48 V] Works well with our Sennheiser Evolution Plug on Transmitter.

[Internal] Already used the Shure SLXD1 Digital Wireless Bodypack Transmitter with my Shure handsfree headset and it have worked flawlessly. Great sound and no interruptions or breaks in the connection. Thanks

[Plug-In Power] Works great with my Sennheiser ew112 G3 transmitter and receiver. Nice and clean!

[5 x 3.5 x 2"] The Sennheiser SKM5200-II Handheld Transmitter with the Neumann Capsule had a clarity that was indescribable. There are only a few mics that would make you just drop everything. I would say this Neumann-Sennheiser configuratio is most definitely one of those few.

[0.45 lb] We need a way to transition from XLR to the input socket on our Sennheiser transmitter. This simple cable was the absolute best way to accomplish that. It is good quality and works reliably. We are glad we bought it.

[0.315 lb] I'm a professional video producer. I have long used a Sennheiser wireless system with my SONY camcorders, I ordered this lav to use with my newly purchased DJI wireless mic system because it does not have the locking connector that would prevent its use with the DJI transmitter. And because according to reports I read, it performs well with the system with no hiss. I have found that with the DJI transmitter's gain set to 0db and the receiver (plugged into my iphone 8) set at +6db, the results are very good with the gain boosted in post. As expected, when I tested the lav with my Sound Devices MixPre-3 recorder, the sound was considerably better with little boost needed in post. This lav performs at least as well as my Sennheiser. It provided the solution I needed and is good value for the money.

[2] Bought these last minute to use with my Sony Fx6. I found them to be much more straight forward than my old Sennheiser EW 100 ENG G3 kits, that always got hits while I was in the middle of recording. I love their simplicity, I love that you can have two transmitters with one receiver. NOTE you must buy the Sony SMAD-P5 Digital MI Shoe Adapter for UWP-D if you want to utilize the transmitter and your hot shoe feature on your Sony Camera! This adaptor makes it so your Sony camera not only powers the transmitter, but it lets your camera access the audio, so you don't need to run an 1/8 inch cable from your transmitter to your XLR inputs on your camera. It's amazing, truly treamlines audio on your Sony camera!

[Touch Fastener] Fit my Sennheiser SKP-100 transmitter. The case is an important component in carrying and protecting these audio product.

[3.3' / 1 m] We need some way to supply phantom power to a condenser microphone feeding into a Sennheiser wireless transmitter. This proved to be the perfect solution. Its construction is first class and it works flawlessly. We're so thankful we were alerted to this product and highly recommend it.

[7.25 x 4 x 3.1"] I use this with my Sennheiser transmitter. Its a little big but I love that I can hang the mic off my belt so it is always handy in a news situation.