Bosch Front Loader Washer

[6.65 lb] Received today, I wont get to deep in the unboxing as its very easy and the paperwork is child proof. It all fit together and even shows you where on the cartridge to put your finger pressure when replacing the ink for best results. A few things to think about. First I used ultra smooth fine art paper from Epson, it will feed through the top loader sometimes, though much more consistent in the front loader. BUT...It must be Very straight, use the lines on the entrance tabs and make sure the are lined up Perfectly on each side or you will repeat until its perfect, and this is done by hand, the feeder will not straighten it for you if you start it even a little bit off line. I was able to print out all the pictures you see on the rack (13 )with the starter inks, I ran out of light grey first then light vivid magenta. I got 4 prints after the light black low prompt came on the little screen on the printer, the computer will tell you well before that. A bit to much play in some of the plastic covers, and the feed tray cover on the front feed Must be closed each time after you feed it before you print. It will load but will not print until closed but there is a prompt to do so. Maintenance box is about 15 percent full after all these prints and setup, so with an extra box included you have plenty of time, most came form initial setup of inks. I actually think its faster than the average review says, but I have never been a production printer and I usually do not print border-less, I mat my most of work and its just covering up Very expensive inks. The little screen is very well thought out, bright, clear and menu items easy to find, its a touch screen that swivels up but Its tight enough and does not move when you use it. I will edit this if I find anything that may be of use. I am glad to have it,.... and as ALWAYS.... very pleased with the way B&H provides the best shopping experience available online or in store....

[0.1 lb] I purchased the Back Loader but I did not like zipping it up and flipping it over to access the front panel. The Font Loader works. For Travel with 2 camera bodies, lenses, drone, mics and accessories the Pro Light Front Loader is great.

[Handle] I like the size of this insert. It fits nicely into all my front loader backpacks, so I'm not limited to a "photo backpack ". Also it is just right for my z7, 15-30, 24-70 and 70-200 all f/4. Plus batteries and a few filters.

[Wall Mount] Extremely happy with my camera mount. It is very sturdy and well made for my Bosch security camera.

Extremely happy with my camera mount. It is very sturdy and well made for my Bosch security camera.

[Black] Just what I needed to use my top loader with my action x.

[0.25 lb] Replaced Optex 40 X pri with Bosch Blue Line detectors. Bosch is quite a bit more sensitive and gives better coverage. These are great atributes for a good alarm system. Did not use the tamper portion of the detector. I have a 4 wire lead to the detector. Red to plus, black to neg. and the two other leads to the n/c terminals. Polarity is of no concern as you connect the n/c wires.

[Alarm: Blue LED] I kept having false alarms and it was the old motion detector of a different brand. 2nd one that I've replaced with a Bosch and not one issue. And I thought the price was fair too.

[1 User] I am a former Bosch Security Systems/Detection Systems employee. As someone who was part of the engineering department, I know the technology that is behind their products. There are years of experience when it comes to PIR sensors. Recommended highly.

[Illumination ] great quality, durable, and zero's in very easily. Ready for muzzle loader season!