Cable Gigabit Ethernet Lan Cat 6 Rj45

[Pole] I use this to extend my LAN inside my home to a spot that is virtually impossible to run Cat 5/6 cable. Distance is 70 ft and it's a clear shot. Works great. This probably would not have worked if there had been walls blocking the beam. The 60 GB GigaBeam replaced a mesh WIFI access arrangement resulting in more stable WIFI connections. It also feeds a network switch to other devices in that end of the house.

[100] I used these for work regularly and are exactly what I needed for 23awg solid wire shielded cat.6

[Wall, Ceiling] This is the simple but versatile device that I recommend as a router for all my friends and family, and will also use as an access point for them or small businesses where integrated solutions are too complex for a handful of users. Qualcomm Atheros chipset, with 350 Mbps WAN To LAN capability routing. Firmware has stabilized and now I am able to fully recommend (January 2021), albeit feature set is still lacking compared to AirRouter predecessor, but offers core abilities for baseline users. For the airCube, plug the ethernet from the modem into the WAN (eth0), then you may connect your computer via wireless or ethernet to the LAN ports (PoE In, 2, or 3), typing in https://192.168.1.1 in your web browser, with ubnt as username, and password printed on the label beneath. Most people are now aware and desiring to minimize wireless radiation, so I recommend them to turn off the 5 Ghz wireless, and configure the 2.4 Ghz for 20 MHz Channel Width, select channel 1, 6, or 11, while starting with 5 dBm output power (transmit power is logarithmic, so 5 dBm is 3mW, wile 20 dBm is 100 mW), and choose the SSID Name and Password. Look for a signal strength of -80 dBm or better (-55 to -60 dBm ideal) is recommended for stable links, and increase the output power until that range is achieved for desired places. Obviously, line of sight and height is appreciated for more effective communication. Increasing the Tx power on any wireless device will create a noise for other wireless devices. The rest you could choose to remain as default or configure more.

[512] I use this with a 20gbps ethernet SFP+ backbone uplink from the UniFi SFP+ Aggregation Switch. My LAN has never been faster!

[5 VDC] Works well. We are using it over a very long cat 6 cable.

[0.11 lb] Works fine with Windows and Mac. This adapter can basically max out a gigabit Ethernet connection. I have it connected to a USB port on the back of my monitor so that a single cable gets me not only power and video, but also a better internet connection.

[16 GB] I finally decided to sign up for a streaming TV service, but my circa 2016 Samsung Smart TV was too old to run the latest streaming apps. After doing a LOT of comparison of Roku, Fire, etc. I settled on the NVIDIA SHIELD TV and I'm extremely happy. I wanted a device that could support Gigabit ethernet (instead of operating via WiFi) and the SHIELD fit the bill. The only other device that fully supports Gigabit ethernet is Apple TV, but since I'm already in the Android ecosystem the NVIDIA SHIELD was really a no-brainer. Very satisfied user.

[1x 3.5mm Male] I got this for a PC that had no free slots for a 10 gigabit Ethernet card. It installed automatically on Windows 10 and has been perfectly reliable for the first couple weeks. Very solid performance at 5 gigabit.

[10 W] Add Gigabit Ethernet port to laptop. The Yoga 6 build-in Wi-Fi is unstable, & it doesn't come with Ethernet port. Adding this adapter would allow it to connect the network with stable wired connection. With the extra USB ports, you can connect more accessories such as wireless mouse & keyboard.

[1x USB-C] Not many laptops come with an RJ45 Ethernet connection anymore. I don't know it's faster than wifi, but it's definitely not slower. Enabled me to use my CAT6a cable to go directly to my router. Just plugged it in my Windows 10 laptop, and it works great.