Clear Acrylic Wall Mounted Business Card Holder

[0.22 lb] I really needed a smartphone holder to be mounted on a tripod, for Zoom / Skype for business conferences and remote yoga/Pilates lessons during the coronavirus pandemic. That one is really good, all-metal and lightweight, compact, with smoothly moving parts to be widened in order to hold phones of different width. Easily mounted on a standard QR tripod plate. Very recommended.

[0.4 lb] This is a well designed card holder.

[55 mm] I approached this purchase from a different perspective. I had the Lee filter system and on my first trip to Iceland, scratched the acrylic grad filters. I decided to replace them with Haida glass filters and bought both ND and grads so the color would be consistent and tried to use them with the Lee filter holder, which should work based on the reported size, but found that the 100 x 150 grads slipped in the Lee holder if they were vertical. If I applied the Haida gaskets, they were too tight to insert, almost couldn't remove them when i tried to force them in, so that is really a flaw with Haida. So, I decided to try this M10 filter kit. I had looked at this a couple of times but didn't really understand the drop in round CPF until i watched a couple of YouTube videos. Well, this is sooo much better than the Lee holder!! On Lee, you have to screw on the CPF on the outside and it can easily get too tight when rotating the polarizer making it difficult to remove. Also, takes a lot to get it screwed on to start with .... oops, missed the shot! The included CPF in the M10 kit just drops in place, then has a little wheel to adjust the angle. Awesome easy to use, install, and remove. Filters fit great now. Wish I had not waited to try this. Apparently, the older Haida filter holder is difficult to use and I would not recommend it based on the reviews, this is definitely worth the money, and it includes the CPF in the kit. Every once in a while you buy something that is so great you just love to use it. This is my new best photography gadget. Can't recommend it highly enough. Oh, and the color cast on the glass Haida filters is much less noticeable than the old Lee acrylic filters. Lee has a great reputation, but is living in the past. Time to move on from them.

[0.265 lb] I use the A6000 for personal photography. I have taken a few pictures that are printed on aluminum and acrylic and hanging on my wall next to professional photographers and you can't tell the difference! Love the ease of use once you figure out where everything is in the menus. Wifi works great and the transfer to phone/tablet is an awesome feature for the social media crowd.

[PCI-Express 3.0] Initially I had purchased this card for my Z6ii and my Z7ii about a year ago. The performance in those cameras was underwhelming for the amount this card cost, so I ended up returning it for a different card. I'm guessing that more than likely it was a firmware compatibility issue of some sort between those cameras and the card. Since then, Sabrent has contacted me to give the card another try. I have since upgraded cameras and tried the new one in my Nikon Z8, which should be an even tougher test for this card. I'll say, this thing is considerably faster in the Z8 than the other two. I calculated an average of about 800MB/s write speed onto the card in-camera with a mix of Full size/quality RAW and JPG photos. It handles 8k60p video without any issues. It definitely gives my Lexar Diamond 512gb card a run for its money. The only thing that the Lexar does better, is under the same load the Lexar can sustain it almost indefinitely (i let it go for about 2 minutes before stopping cause it hadn't hit a buffer wall yet), where as the Sabrent hits a wall and the buffer has to clear after around 15-20 seconds of 20fps full size images. For most people, this probably wont be an issue, and it seems to clear the buffer very quickly when it isn't being written to at the same time. Overall, with this card being cheaper and twice the capacity of the Lexar makes it definitely a good bang for the buck.

[Plastic, Steel] Very easy to use and functional for wall mounted TV

[Color] Perfect size made of wood and acrylic

[0.36 lb] Handy little piece of gear. I like how they made it so it can be mounted under a desk or table, but also on a wall.

[49 mm] For business taking pictures of my products Pictures are clear and good

[3.5-Slot] Card arrived 2 business days after ordering, B&H also called and verified my order before they shipped it out which I thought was nice. The card runs great, I can pretty much run any game maxed out settings on 4k getting over 100 frames. Temps on the card also stay pretty low.