Clip On Microphone Stand

[5/8" Receiver] This works great and allows me to attach my microphone clip to the boom on my sturdy light stand. The sturdy set up means that the microphone stand will not fall on expensive instruments.

[Stereo] I bought this shockmount for use with Neumann KM184, which are extremely sensitive to movement, shock and vibration even at very low, even almost subsonic frequencies. If I use a conventional mic clip on a stand on stage for example, I get booming footsteps through the stand/clip. I have tried several other rubber-band style mounts, which help slightly, but still not acceptable. This lyre type clip is the best I have tried. Any residual noise is at such low frequency, that I can filter most of it with a highpass at 20 or 30 Hz. But to be truly effective, however, you can not use standard microphone cables (1/4 diameter) because the stiff mic cable puts stress on the lyre and makes it less effective. Moreover, the cable itself conducts mechanical noise to the microphone body. To get the best performance, use a cable made with Mogami 2697 super thin balanced mic cable, make a small loop behind the mic and clip the cable into the strain-relief built-in to the back of this clip. If you have a long mic cable run, just use a 3' pigtail of the thin cable at the mic for this purpose.

This works great and allows me to attach my microphone clip to the boom on my sturdy light stand. The sturdy set up means that the microphone stand will not fall on expensive instruments.

[Green] Serves its purpose! Works exactly as described! Just wish it came with a microphone clip.

[None] This is a simple microphone stand.

[1.05 lb] Where can I get a new mounting clip for speaker to stand mount?

[0.085 lb] This clip was a replacement for one that became inadvertently detached from its microphone. This one is much better; has a better grip. I bought two just in case.

I am a professional Audio Engineer working in the television industry. Discreet microphones (and their cords!!) are a necessity. The design of this clip is genius. It holds the stress loop and cord in place, which makes placing the microphone on your Talent very fast and efficient. No fumbling around trying to catch the cord in the back of the clip anymore!! Also, equally as noteworthy, it rotates!! Placing a microphone on clothing with a round neckline (Like a ladies blouse, or a t-shirt) can easily be accomplished! The design alone is why I give this 5 stars!! HOWEVER...there are a few things that need to be noted. The clip could be a little stronger. It does not hold tightly. But that being said...in some cases where your Talent will not be moving around, it is also a blessing that it is not stronger! It is so lightweight, that it can be used on delicate fabrics. Lastly, watch the cord dimensions when you are ordering this clip. (In other words, learn from my mistakes!!) It is available in 0.8-1.5mm and 1.5-2.5mm. The Sony ecm77 wired, and Shure WL-50 (used on older model ULX1 wireless bodypack) WILL NOT fit in the smaller (0.8-1.5mm) size clip. Since it is fairly obvious that I know this due to experiencing it, I will share a workaround!! I used a drill press and bored the opening a little larger, but that is a little time consuming! I also ordered the larger size and it fit perfectly. So in summary...I definitely recommend this clip. I will be purchasing a few more. It is a great, inexpensive clip. Just make sure that you have a heavier duty clip to use in situations where your talent will be standing, or moving around.

[Download] This is a much better product than the one that came with my Sony Wireless hand microphone. It even had a clip to put it on your belt.

[Tie Clip] I am a professional Audio Engineer working in the television industry. Discreet microphones (and their cords!!) are a necessity. The design of this clip is genius. It holds the stress loop and cord in place, which makes placing the microphone on your Talent very fast and efficient. No fumbling around trying to catch the cord in the back of the clip anymore!! Also, equally as noteworthy, it rotates!! Placing a microphone on clothing with a round neckline (Like a ladies blouse, or a t-shirt) can easily be accomplished! The design alone is why I give this 5 stars!! HOWEVER...there are a few things that need to be noted. The clip could be a little stronger. It does not hold tightly. But that being said...in some cases where your Talent will not be moving around, it is also a blessing that it is not stronger! It is so lightweight, that it can be used on delicate fabrics. Lastly, watch the cord dimensions when you are ordering this clip. (In other words, learn from my mistakes!!) It is available in 0.8-1.5mm and 1.5-2.5mm. The Sony ecm77 wired, and Shure WL-50 (used on older model ULX1 wireless bodypack) WILL NOT fit in the smaller (0.8-1.5mm) size clip. Since it is fairly obvious that I know this due to experiencing it, I will share a workaround!! I used a drill press and bored the opening a little larger, but that is a little time consuming! I also ordered the larger size and it fit perfectly. So in summary...I definitely recommend this clip. I will be purchasing a few more. It is a great, inexpensive clip. Just make sure that you have a heavier duty clip to use in situations where your talent will be standing, or moving around.