Computer Clip On Mini Lapel Microphone

[1 to 10 V] The LC-1 Lapel Clip, available from B&H, is the original that comes with the Azden lapel microphone, but is not avaible from Azden. The clips are designed well but may still be subject to breakage if talent tries to snap the microphone on or off the clip rather than sliding it.

[5.15 lb] This was used with a Samson Expedition XP800 amp/mixer/speakers system for an all day event with about 100 people under a large tent. The system was easy to set up and connect with the XP800. The microphones worked very well. For the small microphone, you have the choice of clipping a lapel clip to it or a headset/boom. We used the lapel clip. Be sure to clip it near the center of the body for best pickup. Our first user clipped it a bit to the side, and every time he turned his head the other way, his voice trailed off. With it clipped to a shirt under the chin,, the pickup was remarkable and clear. The instructions state that the mics need AA alkaline batteries and they will last about 8 hours, and don't use rechargeable batteries. These mics were used a lot and did die after about 8 hours. Next time I would use Energizer Lithium batteries for a very long event. A couple of times the microphone popped off of the lapel clip when the speaker had muted their mic and was working with their hands and not paying attention. It clips back on easily.

[1.45 lb] Had no problems with it. I have both the handheld microphone and the lapel microphone and they both fit well and securely!

[1/8" (3.5 mm)] It is a fun look, like a mini camera. The gooseneck mounting system works very well with a desktop computer, as you are looking directly into the camera instead of the camera looking down or up on you. The microphone picks up well. It automatically installed on the Mac computer.

[0.015 lb] The replacement clips fit several of our lapel microphones. They are easy to clip on to apparel and are small enough to be inconspicuous.

[0.1 lb] Great little lapel clip. It has nice loops on the back to hold the wire and hide it nicely. Very small and compact.

[6 x 3.2 x 2.7"] I use the headset mic, not a lapel mic. I use the upgraded 2mm cable which constantly popped out of the original headset cable clip. This Tie Clip is much sturdier and the cable does not pop out of its holder so for that use, I highly recommend it.

[Omnidirectional] I don't have experience with many lapel mics, but this one works just like it should. You clip it on and get the sound you want without the other distracting noises. The sound is very natural, not like most computer mics.

If you use Lapel Mics with a clip, this is the best of its kind to keep the Mic away from clothing etc. I use it with a Countryman B3 and a foam windscreen. No scratching or rubbing from shirts.

[Tie Clip] If you use Lapel Mics with a clip, this is the best of its kind to keep the Mic away from clothing etc. I use it with a Countryman B3 and a foam windscreen. No scratching or rubbing from shirts.