Custom Projector Screen Fabric

[ARC, eARC] I am using this projector in a home theatre with a 120 screen. I am driving it with a custom built HTPC and it does 3D as advertised. Picture quality is top notch and I keep it set on Eco mode for long lamp life.

[1.1] We use this projector screen in our church activities.

[0.5-Stop] I built some custom softboxes and needed standalone fabric diffusion panels that wouldn't disturb the quality of light (like many fabrics do). Chatted online with B&H who recommended these replacement panels and they were perfect! Large areas of beautifully soft light right where I needed them... and on an indie budget no less.

[ABS] I installed them next to my projector screen and they sound great.

[1x HDMI Male] Anyone looking to extend there monitor onto a TV screen or projector this is the way to go.

[Download] Using this to decode an NDI source to a projector in Church services with live stream. We previously were sending the Presentation Laptops screen to the OBS computer via NDI, and used a separate proprietary wireless video feed to the main projector. Got this so we can use the same NDI source for both and eliminate the wireless projector feed. It is working well. One thing to be aware of: the projector will display will go blank in a couple of seconds if there is no video and audio activity when using NDI Screen Capture as the source. This can be an issue during power points with static screens. You can set the decoder to keep the last thing displayed on the screen or allow it to go blank. I prefer it to go blank so I know something is wrong right away. You can also resolve by making sure the NDI Screen Capture is using an active audio source (like the microphone). This decoder has been reliable and is reasonably priced. Perhaps other decoders won't have the inactivity issue but they are also more expensive. This has not been a show stopper for us.

Using this to decode an NDI source to a projector in Church services with live stream. We previously were sending the Presentation Laptops screen to the OBS computer via NDI, and used a separate proprietary wireless video feed to the main projector. Got this so we can use the same NDI source for both and eliminate the wireless projector feed. It is working well. One thing to be aware of: the projector will display will go blank in a couple of seconds if there is no video and audio activity when using NDI Screen Capture as the source. This can be an issue during power points with static screens. You can set the decoder to keep the last thing displayed on the screen or allow it to go blank. I prefer it to go blank so I know something is wrong right away. You can also resolve by making sure the NDI Screen Capture is using an active audio source (like the microphone). This decoder has been reliable and is reasonably priced. Perhaps other decoders won't have the inactivity issue but they are also more expensive. This has not been a show stopper for us.

[10 oz (286 g)] This thing worked great. This is just what I needed to get my screen up and another screen to my projector up at the same time in my sanctuary. This was great.

[Wide] I ordered this screen to go with my BenQ HT3550 projector (also through B&H Photo) and had about a week of viewing on a bare white wall prior to the screen being put up. The difference is dramatic. The two areas the projectors trail behind TV's is color reproduction and contrast. I was initially worried that the ES Sable Frame CineGrey fixed frame screen may sacrifice color vibrance for the sake of contrast, but I was pleasantly surprised to find that the brightness and color brilliance did not suffer at all even though the contrast was boosted tremendously. In my light-controlled room, both contrast, color, brightness, and sharpness was significantly *better* than my 55 inch 4k HDR LED T.V., which was not at all the case when I was projecting onto a bare white wall. Well worth every penny. Installation notes: definitely need 2 people to do the job, and just in case you are wondering if they accidentally gave you the wrong fabric...just keep rolling it out. There was a good 4 to 5 feet of white protective fabric before you actually see the screen material. Oh, and once the frame itself is assembled, I highly recommend going ahead and installing the top mounts to your wall, making sure wverything lines up with the bare frame, and *then* putting the frame back down and attaching the fabric. It is a lot easier to make adjustments and alignments without the fabric in and this also reduces the risk of accidental damage to the fabric.

[Yes] Heavy duty screen fabric. Some initial packaging wrinkles, but they fell out easily. Great product for the money and miles above the cheaper options.