Electric Wall Projector Screen

[Floor mounted] This screen was installed in a small conference room with an NEC projector. The screen can be wall or ceiling mounted, and this flexibility came in handy when we had to switch to a ceiling mount at the last moment. The screen presents very well, and is unobtrusive when retracted. The tensioning system works nicely, and we didn't have to change any of the factory settings for the drop. I would have liked to see some additional mounting holes for attaching the screen to studs in the wall, so the installer has more options for wall mounting.

[Native: 16:10] For years, our old projector used the back wall of the church as a screen. The black parts of videos were washed out, even with the lights off. We got an Ambient Light Rejecting screen, which made the dark parts much deeper, but, unfortunately, it also darkened skin tones and colors. This new Epson Powerlite has enough punch (4000 ANSI lumens) that the ALR screen feels like a TV set. Skin tones and colors are accurate, and the dark portions are really dark, like they're supposed to be. The mounting of the projector was fixed, and initially I was disappointed that the throw distance was different from the old projector. At the tightest zoom, the image was larger than the screen by about 8 inches on a side. It was then that I discovered that the digital zoom had negative numbers and I was able to shrink the image to the size of the screen, There is a slight 8 glow on the wall around the screen which is hardly noticeable. I can see it because I know it's there, but no one else has mentioned it yet. The remote control is powerful enough to bounce its signal of the wall to activate the ceiling mounted projector. The old projector required exact aiming from in front of it to turn it on or off, The remote control also has specific buttons for each source which makes changing from VGA to HDMI really simple. Overall, I don't think I could be happier about this purchase. It has given our church a much better video experience.

[1.1] We use this projector screen in our church activities.

[ABS] I installed them next to my projector screen and they sound great.

[13.0" (33.0 cm)] Was just as advertised and worked great for our projector and wall mount.

[1x HDMI Male] Anyone looking to extend there monitor onto a TV screen or projector this is the way to go.

[Download] Using this to decode an NDI source to a projector in Church services with live stream. We previously were sending the Presentation Laptops screen to the OBS computer via NDI, and used a separate proprietary wireless video feed to the main projector. Got this so we can use the same NDI source for both and eliminate the wireless projector feed. It is working well. One thing to be aware of: the projector will display will go blank in a couple of seconds if there is no video and audio activity when using NDI Screen Capture as the source. This can be an issue during power points with static screens. You can set the decoder to keep the last thing displayed on the screen or allow it to go blank. I prefer it to go blank so I know something is wrong right away. You can also resolve by making sure the NDI Screen Capture is using an active audio source (like the microphone). This decoder has been reliable and is reasonably priced. Perhaps other decoders won't have the inactivity issue but they are also more expensive. This has not been a show stopper for us.

Using this to decode an NDI source to a projector in Church services with live stream. We previously were sending the Presentation Laptops screen to the OBS computer via NDI, and used a separate proprietary wireless video feed to the main projector. Got this so we can use the same NDI source for both and eliminate the wireless projector feed. It is working well. One thing to be aware of: the projector will display will go blank in a couple of seconds if there is no video and audio activity when using NDI Screen Capture as the source. This can be an issue during power points with static screens. You can set the decoder to keep the last thing displayed on the screen or allow it to go blank. I prefer it to go blank so I know something is wrong right away. You can also resolve by making sure the NDI Screen Capture is using an active audio source (like the microphone). This decoder has been reliable and is reasonably priced. Perhaps other decoders won't have the inactivity issue but they are also more expensive. This has not been a show stopper for us.

[10 oz (286 g)] This thing worked great. This is just what I needed to get my screen up and another screen to my projector up at the same time in my sanctuary. This was great.

[Lockable doors] It worked perfectly, and it is very easy to mount on a hollow wall, at least. The perfect shelf for a projector.