Ev Condenser Microphone 400

[Mono] I have an old original EV PL 76A electret condenser microphone. It is still one of the best sounding, small diaphragm, condenser microphones from the early 70's. Originally it had an internal foam pop filter built into the inside of the protective grille cover over the diaphragm element. Over the years this foam filter dried out and fell apart. I use this microphone quite a bit for voiceover work and I needed to replace the foam. I looked everywhere for a replacement. I finally checked B&H for generic pop filters. I was surprised to see that B&H actually had the large over the outside grey pop filter made by EV as an accessory for this microphone. I bought it immediately. It fits perfectly, looks great, the price was right and does exactly what a wind screen/pop filter is supposed to do. Thanks B&H for always having what I need.

[Large Diaphragm] good basic Large Capsule Condenser Microphone.

[5/8" Receiver] Use this to hold up my Blue Condenser Microphone. It's impressive because the microphone is extremely heavy #sweepstakes

[Mute Switch] The EV rackmount kit for two RE3 wireless microphone receivers is very well designed and constructed. The mechanical hardware is sturdy, and the extension RF cables for the antennas are of top quality. Assembly was easy and very sturdy.

[Cardioid] I use this windscreen with an EV RE-16 microphone (it's an exact fit). It is very effective--with this windscreen, the RE-16 is almost immune to P-pops, even when used an inch from the mouth, but high frequency response is affected very little.

[22 x 17 x 7"] I use this as an insert on a mic channel to help EQ a sensitive condenser microphone. Works great!

[-43 / -23 dB] I really should have bought the ADX20IP Cardioid Condenser Instrument Microphone WITH the APS910 Power Supply ... but oh well ... live and learn. I use it connected to the Tascam DR-100 MKII and have loved the results.

[50 Hz to 20 kHz] I bought the AKG C3000 primarily because I was looking for a decent condenser microphone, form a reputable manufacturer, within budget. I never expected a magnificent sound from this mic. But my expectations were surpassed considering the sound derived form the C3000. To begin with, this mic is solidly built in Vienna, Austria and looks elegant in black metallic finish. I use it with m101 preamp and the sound is clear and upfront. Given the price, it delivers a well defined sound. I am pleased!

[16-Bit ] In my case, I needed a microphone that was easy to install and would work anywhere. The result is very close to the system I have with microphone condenser + audio interface. The selector switch makes it possible for me to use the microphone in different environments and for different utilities. That is, versatile and with quality.

[1.9 lb / 0.9 kg] I’ve been wanting a way to attach a condenser microphone to my flute for years, and this little device fits the bill perfectly. Perfect for nominally acoustic settings where the sax and clarinet are present enough without amplification, but the flute requires just a bit to be heard above the rhythm section, if you already own a small condenser mike as I did, this is ideal. Yes