Foam Core Board Printing

[Silver] I purchased two of these in order to use a 4' x 8' sheet of rigid insulation board (1 inch thick) as the lower half of a giant clamshell reflector for a makeup shoot. (both photos and video) The forks held the insulation board very firmly and I was able to use a C-stand on each side to easily adjust the height and angle. - Note: the diameter of the prongs is such that you can't use it with low cost 3/16 or 1/4 foam core - you would probably have to go to 1/2 inch foam core which is considerably more expensive.

[4.05 lb] I use this reflector holder to secure a 3-foot square foam core board, balanced along the center axis. It is well made and the counterweight helps with balance. Very pleased with it and would purchase again.

[1.25 lb] The shiny side is very shiny (they did not used to be that reflective). It's a flexfill, better than carrying around foam core.

[60 W] Helps me cut foam board accurately and easily.

[1 x Proprietary] To cut straight foam board 3/16 Works extremely well

[32] Purchased the board with a 5995WX 64-core CPU, 256GB ECC, 2-4TB Samsung 990 NMVe, and an ASUS GeForce 4070TI. E-ATX board has plenty of room for cards. Easy to install and setup. I used Noctua fans and the temp at 70% is only 62 C. If I build another board I'll purchase this same board.

[Paper] Not much to critique about foam core; it is what it is. If you have a thin frame, and don't want to make your sandwich from another piece of expensive museum board, this makes a great, acid-free base, and takes up little space.

[Flat] All of my Kupo products are top quality. I recommend this foam core clamp highly. Super useful in so many situations.

[Zipper] Pelican cases have a hard core rep and after I got mine I can see why. Stable is an understatement. The pick your foam adventure is great to have snug secure gear. now instead of having four separate bags I have one case to take with me to shoots. There is so much room, I have ample room to expand and fit my future gears needs for years to come. That, and the security are more than worth the price.

[0.6 lb] Great for holding foam core and reflectors. The mouth isn't particularly wide on the mini, but is sufficient for most clamp uses. When combined with a C stand this is an excellent tool.