Front Load Washer Boot Ring

[Black] Just installed this on my new gaming PC build and I love it! Boot and load times are incredibly quick for games. Will more than likely be adding another one to my second m.2 slot.

[Aluminum] This is my second WE Black NVMe drive and they have both performed flawlessly. The boot speed and load speed of these drives are quite amazing. This does not come with a screw to mount on your MB so be sure you have the left over hardware. I did not and had to purchase an $8 kit for the mounting screw. All in all this provides great speed at a very reasonable price.

[44 mm to 49 mm] This ring flawlessly adapts things that are 39mm in the rear end to things that are 49mm on the front end!

[Zipper] I haven't actually used this yet, but I did load it, weigh it, and pretend to put it in an overhead for practice. Seems perfect for my gear. I travel with a DLSR, mirrorless and 4 lenses. There is room for that and a change of clothes if a bag gets delayed. The front compartment easily holds my 15 laptop. The laptop compartment sort of locks by attaching the loop on the zipper to the integrated lock for the case (watch the video). The case rolls easily. I agree with the reviewer who said it would be nice if the bottom of the case was flat, but with my gear that is not a problem. The recommended accessory GRID-IT organizer of 10X12 does not fit the interior front pocket and looks like it has been removed as a suggestion. All-in-all this looks like it will be a great bag. It will be my carry-on but seems sturdy enough to gate check on smaller planes.

[Polypropylene] Simple product that does exactly what is needed. Negatives load easily and pages store easily in 3 ring binder. Keep in mind that these are longer than a typical 8 1/2 x 11 binder.

[32.5 dBu] And it does it with no lag or boot times.

[37 mm] Fits LEE 82mm WA lens adapter ring. I can now keep the adapter ring on my lens and use this cap to protect the front element.

[0.125 lb] These are a great set of sights for the Walther PPS. The lime yellow front ring is extremely fast to acquire in the large U-shaped rear notch. I love how the rear sight is completely blacked out, thus not distracting your attention from the bright front sight. The photoluminescent paint on the front ring can be charged with a light source for an even brighter/bigger front sight in dark conditions. The tritium vials glow nice and bright.It's also cool that the rear sight has a cocking ledge that can be used to manipulate the slide one handed. These sights aren't cheap, but you sure get a lot of features for what you pay. Plus you can't go wrong with a quality brand like Trijicon.I used a brass hammer and punch to do the installation myself. The rear sight went right in without any excessive force or filing to fit. The front sight was a nice precise fit in the slide cut out. B&H had the best price on these online and the sights arrived at my door in only 3 days!

[2.8 oz (80 g)] This lens (the L-mount version) seems plenty sharp at F8, although it slightly softens at the left and right edges. I saw no evidence of decentering during a couple weeks of almost daily use. Also I saw little or no evidence of chromatic aberration at F8. It's a little bit glowy at F1.4 but this goes away by F2.8. My TTArtisan 50mm F1.4 L-mount Lens is well built and fits tightly on my Sigma fp L but not super-tight (tighter than my Sigma lens but not so tight that I'm worried about it). Front lens cover is machined aluminum and quite nice but easily lost, so I put it back in the box (a very nice box!) for safekeeping. According to the box, the lens weighs 436 grams (almost a pound). It is about 54mm in diameter (2 1/8) and about 68mm long (2.7) when mounted on the camera. Aperture ring has click-stops (yay!). The aperture ring and focus ring operate smoothly and are well damped, although the focus ring seems to have a slightly tighter spot midway (not much tighter though, and I did not notice it for several days). The lens does not move around in the helicoid, indicating that the focus helicoid is well-made and close-tolerance. I'm using a 49mm pinch-type front cap (Sigma LCF-49 III). My Sensei Pro LHM-49 threaded metal lens hood ($8.29 and 3/4 deep) does not cause vignetting and it takes a 58mm front cap so I can leave it on the lens. I am also using a 49mm Hoya EVO clear protector filter ($42) on the front of this lens at all times. It's worth spending money on a high quality protector, so that the image quality potential of the lens is not compromised. Bottom line is that this lens delivers great images with plenty of sharpness for an amazingly low price.

[APS-C] This little lens is devastatingly underrated. It's compact, sharp, and built like a tank. It's also quite stylish when mounted to my Fujifilm X-T2 and X-T3. The focus ring is nicely dampened and turns smoothly. The aperture ring turns smoothly as well, although I'd prefer a clicked aperture ring. Since the lens is so compact, it's extremely easy to turn both rings by mistake. Like other fisheye lenses, you CAN NOT mount a filter in the front or rear of this lens. The lens hood is solid metal and perfectly protects the giant front element. The lens cap is nice too. A push on style cap that slides over the hood. Be sure not to lose it, because it isn't easily replaced. Here's a sample taken with my Fujifilm X-T2. Shot at ISO 200 f/5.6