Home Depot Air Conditioner Heater Wall Unit

[Folding] Purchased at Home Depot for 20 bux. Was intrigued by the assisted opening. It’s not really ‘spring assisted’ like a lot of knifes claim to be. It’s something else entirely, but whatever it is, this thing is fast. Blink of an eye fast. Not a fan of nylon grips, but dang it man this knife is quick. Blade locks open to which is another feature I really like. At this price point you cannot lose. If they gave you the option to upload a video, lots of folks would be surprised.

[1-1/8", 25 mm] I had to use a thiner pole then it's made to be used with, and it worked perfectly. I combined 2 10ft pipes from Home Depot and hung a 4x6 bounce off a 3 story drop. It was the moonlight effect I always wanted!!!

[E26] The main strength of these bulbs is that you get 500 watt power that you can plug into a conventional socket. No heavy betweenie, no Home Depot stadium lights. A lot of low budget filmmakers wonder where to go after you've graduated from the Home Depot light set. This is your next step up before professional level lighting.Warning, these are incredibly hot bulbs. They do not have a long life. Also DO NOT move the light while it is on or it will burn out.The $ each your paying is so that you don't have to buy a $ professional kit. It is what it is.

[5 V] This speakerphone is very clear on both ends. Was able to hear the other person speaking clearly even when my portable air conditioner was running in the room.

[C-Wire] Easy to use! Controls air conditioner and furnace. Reads humidity levels. Maintenance tracking and reminders.

This speakerphone is very clear on both ends. Was able to hear the other person speaking clearly even when my portable air conditioner was running in the room.

[Hardwired] My wall fluctuates between 126-128V. I have a power conditioner downstream of this voltage regulator to monitor if the power is being optimized and brought closer to 120V. This unit does exactly that! I now have piece of mind that my gear will be safely powered in my home studio. I bought one for my live rig as well since you never know how good the power is at a venue.

My wall fluctuates between 126-128V. I have a power conditioner downstream of this voltage regulator to monitor if the power is being optimized and brought closer to 120V. This unit does exactly that! I now have piece of mind that my gear will be safely powered in my home studio. I bought one for my live rig as well since you never know how good the power is at a venue.

[Yes] Nice little unit, the lower power rating works well to disable the internal heater on the camera (literally the only way to stop the heater from drawing power) very effective for remote applications where each watt counts.

[120VAC, 60Hz] The power tank works better than expected. If I get dew heater strips that will really test it. But so far it seems to be an over achieving unit. It powers my CGEM II mount and the Skyportal Wi-Fi for hours. It is important to note that to get the 12V outlet to work you need to push the battery switch on the panel twice. At first I thought I has a defective unit but then I read the instructions.