Large Sheets Of Foam Core Board

[Silver] I purchased two of these in order to use a 4' x 8' sheet of rigid insulation board (1 inch thick) as the lower half of a giant clamshell reflector for a makeup shoot. (both photos and video) The forks held the insulation board very firmly and I was able to use a C-stand on each side to easily adjust the height and angle. - Note: the diameter of the prongs is such that you can't use it with low cost 3/16 or 1/4 foam core - you would probably have to go to 1/2 inch foam core which is considerably more expensive.

[4.05 lb] I use this reflector holder to secure a 3-foot square foam core board, balanced along the center axis. It is well made and the counterweight helps with balance. Very pleased with it and would purchase again.

[White / Silver] I use this with foam core I bought from Hobby Lobby. I was worried it wouldn't support the flimsy large sheets, but this clamp does amazing! It holds it up inside my house very securely and doesn't bend or damage the relatively fragile board. A little pricey, but it was well worth it. Much easier setup!

[1.25 lb] The shiny side is very shiny (they did not used to be that reflective). It's a flexfill, better than carrying around foam core.

[60 W] Helps me cut foam board accurately and easily.

[0.2 lb] Large sheets used to place in front of a tungsten light's. Fits nicely over a large soft box light. Very thick (does not tear easy). Rolls nicely to be placed in carry tube. This roll will last me a long time!! The quality of the gel allows it to be reused over and over again.

[1 x Proprietary] To cut straight foam board 3/16 Works extremely well

[Up to 99 Copies] My wife printed out about 30 sheets to do her bullitin board at church and was amazed at the color and sharpness from the printer. I would highly reccomend this printer.

[32] Purchased the board with a 5995WX 64-core CPU, 256GB ECC, 2-4TB Samsung 990 NMVe, and an ASUS GeForce 4070TI. E-ATX board has plenty of room for cards. Easy to install and setup. I used Noctua fans and the temp at 70% is only 62 C. If I build another board I'll purchase this same board.

[Paper] Not much to critique about foam core; it is what it is. If you have a thin frame, and don't want to make your sandwich from another piece of expensive museum board, this makes a great, acid-free base, and takes up little space.