Micro Usb Charging Cable Led Light

[0.03 lb] Needed this for charging from a micro-USB cable. Works great for that.

[0.9 oz (25.5 g)] Besides compact, it also has USB-c and micro-USB ports for charging! It was excellent!

[0.505 lb] I bought this lamp for six reasons. 1. You can use it hands free, very useful when you are hauling your photo gear and a tripod. 2. You can adjust the angle of the beam by turning the light on its central axis 3. You can adjust the size of the beam by rotating the front lens. 4. It can produce a bright light of 1000 lumens 5. The rechargeable battery has enough capacity to produce 1000 lumens for a couple of hours and by choosing a lower lumen light options (available through light switch) it can go much longer. 6. It is USB chargeable. In the couple of months that I have used it, it has performed beautifully on all counts. I am impressed. The only remaining item is long term reliability but so far a great job indeed. I have often found it far easier and more comfortable to wear it around my neck (rather than on my head) as I am usually wearing a winter jacket and found this way to be far more comfortable with the elastic strap going around the collar of my parka and the battery hanging over my chest. I do have a suggestion regarding charging it with the micro USB cable supplied with the battery. Instead of disconnecting the micro end of the cable from the battery box, keep the micro end of the cable permanently connected to the battery box and tie the charging cable (after folding etc) with a velcro tape to the coiled cable which connects the battery to the lamp. Then use the other (regular USB) end of the cable to connect (and disconnect ) to a USB hub. This way there is no danger of damaging the micro end which is built into the battery holder and any damage there shall render the whole light worthless and such damage is not easy to repair. In other words, leave the micro end permanently connected. All in all, I am very satisfied and , in my opinion, it is a great value. Five stars. Ajeet S.

[Adapter] I use it to connect a flashdrive to the micro-usb charging port on a Toshiba Encore tablet.

I have another review that I wrote about this mic, but B&H's website doesn't appear to let me update that review. I've now been using this mic almost daily for over a year. The audio is crisp and clear, background noise is kept to a minimum, and people on the other end of the meeting/phone call give compliments on the detail that this mic captures. I used to use a condenser mic, but that also had the annoying feature of picking up a lot of 60Hz hum. This mic doesn't do that and I didn't have to make any adjustments to the room either. For the person who mentioned they couldn't fit it in a shockmount, it has one internally. That is why the mic is the size that it is. For those complaining about the USB port, mine hasn't had any issues. I accidentally bent the micro usb connector on the cheap cable they shipped with it and the mic survived just fine. The cable, on the other hand, was useless after that. I solved this problem by finding a 90 degree USB adapter so that the connector isn't pointing straight out the back of the mic. It now sits mostly flush and swiveling the mic is more likely to cause the adapter to disconnect at the other end. If your laptop, like mine, is usb-c only, don't try to buy long usb-c to usb-c cables. They are crazy expensive. Instead, try to buy a usb-c to mini or micro usb-b cable. They are much cheaper. My setup is usb-c to micro usb (10 feet), then an adapter from micro-usb to usb-c (1 inch), and then finally a short usb-c to 90 degree micro-usb adapter (6 inches).

[Cardioid] I have another review that I wrote about this mic, but B&H's website doesn't appear to let me update that review. I've now been using this mic almost daily for over a year. The audio is crisp and clear, background noise is kept to a minimum, and people on the other end of the meeting/phone call give compliments on the detail that this mic captures. I used to use a condenser mic, but that also had the annoying feature of picking up a lot of 60Hz hum. This mic doesn't do that and I didn't have to make any adjustments to the room either. For the person who mentioned they couldn't fit it in a shockmount, it has one internally. That is why the mic is the size that it is. For those complaining about the USB port, mine hasn't had any issues. I accidentally bent the micro usb connector on the cheap cable they shipped with it and the mic survived just fine. The cable, on the other hand, was useless after that. I solved this problem by finding a 90 degree USB adapter so that the connector isn't pointing straight out the back of the mic. It now sits mostly flush and swiveling the mic is more likely to cause the adapter to disconnect at the other end. If your laptop, like mine, is usb-c only, don't try to buy long usb-c to usb-c cables. They are crazy expensive. Instead, try to buy a usb-c to mini or micro usb-b cable. They are much cheaper. My setup is usb-c to micro usb (10 feet), then an adapter from micro-usb to usb-c (1 inch), and then finally a short usb-c to 90 degree micro-usb adapter (6 inches).

[6 x 4.5 x 0.2"] [This review was collected as part of a promotion.] Perfect length for charging my devices that still use micro USB like my Bluetooth speaker. Connecting ends are very sturdy and don't bend. Charging end snaps in well and doesn't move. 5 of 5 stars easy.

[Lithium-Ion] Full Disclosure: Coast provided me this ZX600 battery in order for me to test it out. But, everything I will talk about in this review is my own opinion. Coast Portland was not given copy approval nor any editorial input in this review. That means, they're reading this review for the first time along side you. These are the topics I will cover. Skip to whatever corresponding number in order to read about that specific topic and find what you are looking for. 1) Overview 2) What I Dislike 3) Charging Port/Charging Indicator 5) Charge Time/Battery Satistics 6) Thoughts The Individual Topics Begin Here: 1) Overview: • The ZX600 battery is desighned to fit in place of 3 AA batteries • It is a lithium-polymer battery • It has a hard casing and can be inserted only one way with large marking denoting positive (+) and negative (-) 2) What I Dislike: • I dislike the use of a Micro-USB port to charge the battery instead of a newer USB-C port • Recharge time is ridiculously long 3) Charging Port/Charging Indicator • There is a Micro-USB port on the front of the battery • There is a charging indicator to the left of the Micro-USB port • A solid red light indicates charging and a solid green light indicates the battery is fully charged 4) Charge Time/Battery Satistics: • The battery was tested from completely dead Rated Capacity: 2100 mah Tested Capacity: 2241 mah Charge Speed: 450 mah Time: 5 hours 34 minutes 5) Thoughts: I really like the concept of this battery. I love how it is designed to just fit in place of where AA batteries normally go while still allowing the use of AA batteries if necessary without any fuss. I do wish they would make a generation 2 of this battery adding much needed improvements. Overall, it is a genius solution.

[0.35 lb] The Lexar 3.1 Reader has worked reliably every day for the last few months. It seems to allow nearly full read & write speed of v30 and v60 SDXC cards when connected to a USB-C port with an adapter and also works as expected on USB 3 Type-A ports. The bright indicator LED changes from red to blue when a card is mounted. Insertion and removal of SD cars is smooth and easy with no scratching of card contacts. I don't use micro SD cards, so haven't tried the micro SD slot yet. Idle current for the LED and interface chip is a low 31.4 mA (no card inserted) and the reader stays cool during extended use. Seems to be a reliable card interface at a reasonable price.

[Multimode] I am very impressed with this charger. It can provide up to 200w, which is fantastic. Having 5 ports (3 USB-C and 2 USB-A) makes charging multiple items a breeze and because it's so powerful, everything charges very fast. I have plugged a variety of things into this charger including my laptop, iPad, phone, Oculus Quest 2, action camera and others, and have had zero issues. It is a smart charger so it protects them against both overcharging and short circuits which puts my mind at ease. I love that it has an LED display. You can see exactly the charging status and keep track of the individual and overall draw. I also like that each port has its own color on the LED display so it is easier to identify. The build quality is excellent. This thing has some weight to it and it is very solid. The ports are well made and when I plug things in they fit snug, but are not too tight that you struggle which is exactly what I want. The specs say it uses Gallium Nitride instead of silicon, which keeps the charger cool. And I agree it does stay much cooler than previous hub chargers that I've used in the past. I love having this as a charger, it is perfect for a charging station because it can handle pretty much anything I throw at it and I have no concerns. It has been a fantastic addition to my workflow. [I have received this product in exchange for my honest review]