Mini Micro Usb Cable 1.2

[0.17 lb] I use this cable primarily to feed power via USB-C PD (power delivery) to my Micro and Mini V-Mount batteries that feature USB-S PD to power a Sound Devices Mix-Pre 6 Recorder. The cable wire has a nice and grippy material and the USB-C connectors stay well secured and will not come off easily to ensure a secure connection, especially when powering a recorder, in which I cannot afford to get power loss or interruptions, especially when recording critical audio such as interviews or seminars. Very happy with this cable and the size is just about right for my needs. [I have received this item in exchange for my honest review]

[0.03 lb] Needed this for charging from a micro-USB cable. Works great for that.

I have another review that I wrote about this mic, but B&H's website doesn't appear to let me update that review. I've now been using this mic almost daily for over a year. The audio is crisp and clear, background noise is kept to a minimum, and people on the other end of the meeting/phone call give compliments on the detail that this mic captures. I used to use a condenser mic, but that also had the annoying feature of picking up a lot of 60Hz hum. This mic doesn't do that and I didn't have to make any adjustments to the room either. For the person who mentioned they couldn't fit it in a shockmount, it has one internally. That is why the mic is the size that it is. For those complaining about the USB port, mine hasn't had any issues. I accidentally bent the micro usb connector on the cheap cable they shipped with it and the mic survived just fine. The cable, on the other hand, was useless after that. I solved this problem by finding a 90 degree USB adapter so that the connector isn't pointing straight out the back of the mic. It now sits mostly flush and swiveling the mic is more likely to cause the adapter to disconnect at the other end. If your laptop, like mine, is usb-c only, don't try to buy long usb-c to usb-c cables. They are crazy expensive. Instead, try to buy a usb-c to mini or micro usb-b cable. They are much cheaper. My setup is usb-c to micro usb (10 feet), then an adapter from micro-usb to usb-c (1 inch), and then finally a short usb-c to 90 degree micro-usb adapter (6 inches).

[Cardioid] I have another review that I wrote about this mic, but B&H's website doesn't appear to let me update that review. I've now been using this mic almost daily for over a year. The audio is crisp and clear, background noise is kept to a minimum, and people on the other end of the meeting/phone call give compliments on the detail that this mic captures. I used to use a condenser mic, but that also had the annoying feature of picking up a lot of 60Hz hum. This mic doesn't do that and I didn't have to make any adjustments to the room either. For the person who mentioned they couldn't fit it in a shockmount, it has one internally. That is why the mic is the size that it is. For those complaining about the USB port, mine hasn't had any issues. I accidentally bent the micro usb connector on the cheap cable they shipped with it and the mic survived just fine. The cable, on the other hand, was useless after that. I solved this problem by finding a 90 degree USB adapter so that the connector isn't pointing straight out the back of the mic. It now sits mostly flush and swiveling the mic is more likely to cause the adapter to disconnect at the other end. If your laptop, like mine, is usb-c only, don't try to buy long usb-c to usb-c cables. They are crazy expensive. Instead, try to buy a usb-c to mini or micro usb-b cable. They are much cheaper. My setup is usb-c to micro usb (10 feet), then an adapter from micro-usb to usb-c (1 inch), and then finally a short usb-c to 90 degree micro-usb adapter (6 inches).

[0.135 lb] This cable works well with small rig cameras to protect your mini or micro hdmi cables ports

[0.035 lb] I use this cable to connect Z6 (mini HDMI) to Mixpre-3 II (micro HDMI) to transfer time code / recording function. If I press record button on Z6 and MixPre-3 ii will record / stop accordingly at the same time. This cable works. It is not the cable's issue but micro HDMI is a bit small and fragile so I am very careful not to bump the connector thus damage the cable and mating connector.

[60 W] By far the best and most reliable USB to Micro-B cable I've found. Frustration takes a back seat to quality.

[Micro-USB Male] [This review was collected as part of a promotion.] This MIXIT↑™ Micro USB ChargeSync Cable will come in handy. It can be used for charging a device or to rapidly and safely sync your devices. It works on many different brands of devices. I am sure I will use it often.

[0.505 lb] I bought this lamp for six reasons. 1. You can use it hands free, very useful when you are hauling your photo gear and a tripod. 2. You can adjust the angle of the beam by turning the light on its central axis 3. You can adjust the size of the beam by rotating the front lens. 4. It can produce a bright light of 1000 lumens 5. The rechargeable battery has enough capacity to produce 1000 lumens for a couple of hours and by choosing a lower lumen light options (available through light switch) it can go much longer. 6. It is USB chargeable. In the couple of months that I have used it, it has performed beautifully on all counts. I am impressed. The only remaining item is long term reliability but so far a great job indeed. I have often found it far easier and more comfortable to wear it around my neck (rather than on my head) as I am usually wearing a winter jacket and found this way to be far more comfortable with the elastic strap going around the collar of my parka and the battery hanging over my chest. I do have a suggestion regarding charging it with the micro USB cable supplied with the battery. Instead of disconnecting the micro end of the cable from the battery box, keep the micro end of the cable permanently connected to the battery box and tie the charging cable (after folding etc) with a velcro tape to the coiled cable which connects the battery to the lamp. Then use the other (regular USB) end of the cable to connect (and disconnect ) to a USB hub. This way there is no danger of damaging the micro end which is built into the battery holder and any damage there shall render the whole light worthless and such damage is not easy to repair. In other words, leave the micro end permanently connected. All in all, I am very satisfied and , in my opinion, it is a great value. Five stars. Ajeet S.

[LCD Display] not counting the USB power source and micro-USB cable, this is smaller and lighter than the OEM Canon charger *and* charges two batteries at once!