Projector Screen With Blackout Cloth

[1.1] We use this projector screen in our church activities.

[2.12 lb] This saved my life in a blackout where I needed my cpap.

[ABS] I installed them next to my projector screen and they sound great.

[1x HDMI Male] Anyone looking to extend there monitor onto a TV screen or projector this is the way to go.

[Plastic] Loving that it is keeping the screen clean. It is easy to just wipe down with a microfiber cloth when there are fingerprints.

[Download] Using this to decode an NDI source to a projector in Church services with live stream. We previously were sending the Presentation Laptops screen to the OBS computer via NDI, and used a separate proprietary wireless video feed to the main projector. Got this so we can use the same NDI source for both and eliminate the wireless projector feed. It is working well. One thing to be aware of: the projector will display will go blank in a couple of seconds if there is no video and audio activity when using NDI Screen Capture as the source. This can be an issue during power points with static screens. You can set the decoder to keep the last thing displayed on the screen or allow it to go blank. I prefer it to go blank so I know something is wrong right away. You can also resolve by making sure the NDI Screen Capture is using an active audio source (like the microphone). This decoder has been reliable and is reasonably priced. Perhaps other decoders won't have the inactivity issue but they are also more expensive. This has not been a show stopper for us.

Using this to decode an NDI source to a projector in Church services with live stream. We previously were sending the Presentation Laptops screen to the OBS computer via NDI, and used a separate proprietary wireless video feed to the main projector. Got this so we can use the same NDI source for both and eliminate the wireless projector feed. It is working well. One thing to be aware of: the projector will display will go blank in a couple of seconds if there is no video and audio activity when using NDI Screen Capture as the source. This can be an issue during power points with static screens. You can set the decoder to keep the last thing displayed on the screen or allow it to go blank. I prefer it to go blank so I know something is wrong right away. You can also resolve by making sure the NDI Screen Capture is using an active audio source (like the microphone). This decoder has been reliable and is reasonably priced. Perhaps other decoders won't have the inactivity issue but they are also more expensive. This has not been a show stopper for us.

[10 oz (286 g)] This thing worked great. This is just what I needed to get my screen up and another screen to my projector up at the same time in my sanctuary. This was great.

[0.83 lb] The cleaner is perfect, good for any kind of screen or equipment. And the cloth that comes together is soft and makes a great combination.

[Polyester] The problem with Green and Blue screens is usually not wrinkles at all. It is shine and light spill from the screen fabric to your product or persons. The material on this is more light absorbing and light deadening pretty much eliminating the lighting feedback or spill completely. A lot of people think that putting more and more light on the screen solves the problems when in reality it compounds the problem. With the Wescott you only need a kiss of light to do the job and to do the job well. The material they use is much closer to a felt rather than a bargain cloth which usually has a built in sheen to it. And that sheen becomes your problem. The Wescott is more like a microfiber cloth that deadens the light that bounces back. The bigger surprise is you can take it right out of the included travel bag all crumpled up, put it in the drier at lowest heat setting for 10 minutes and the wrinkles are 90 percent GONE!! Unless you are using this and throwing them away, I would recommend this far and above over the other screens made with plain fabrics. Thumbs up! Peter