Ps2 Wireless Ethernet Adapter

[Cat 6] Not much to say, it's a USB to Ethernet adapter. Works exactly like you would want it to.

[0.115 lb] [This review was collected as part of a promotion.] The Belkin USB-C to Ethernet + Charging adapter is amazing tool to have with you when you need an ethernet connection. The USB-C to Ethernet + Charging adapter charges your connected device while also providing an ethernet connection, so no need for multiple connectors. I have been using this on my Android phone and my laptop, both devices have a USB-C port and my Belkin adapter worked great on both devices. It provided an adequate charge and a stable internet connection without any issues. The adapter was immediately recognized by both devices and there was no need to install any software to make the adapter work. The adapter is also small and portable enough to carry with you anywhere you go. I would highly recommend this adapter to anyone looking for an ethernet + charging adapter.

[0.15 lb] works great, does not heat up as much as other ethernet adapter I've had.

[Bus Powered ] I always take my multiport adapter with me whenever I'm traveling. Super handy especially the ethernet port.

[2x AAA] best use adapter for wireless remote controller

[10 to 90%] Works very well. I placed four of these around our house for full wireless coverage. Easy to set up. It also gives us ethernet coverage to the far side of our house.

[Cat 6a] Ethernet cables are ethernet cables, but these are fine!

[1.135 lb] I needed to convert ethernet to DMX for setting up wireless DMX. The products mostly mentioned in YouTube videos are either discontinued or way more expensive than this product. I took a chance with this but it works perfect and was super easy to configure. I highly recommend this for anyone needing to control DMX from a computer or mobile device.

[Wall, Ceiling] This is the simple but versatile device that I recommend as a router for all my friends and family, and will also use as an access point for them or small businesses where integrated solutions are too complex for a handful of users. Qualcomm Atheros chipset, with 350 Mbps WAN To LAN capability routing. Firmware has stabilized and now I am able to fully recommend (January 2021), albeit feature set is still lacking compared to AirRouter predecessor, but offers core abilities for baseline users. For the airCube, plug the ethernet from the modem into the WAN (eth0), then you may connect your computer via wireless or ethernet to the LAN ports (PoE In, 2, or 3), typing in https://192.168.1.1 in your web browser, with ubnt as username, and password printed on the label beneath. Most people are now aware and desiring to minimize wireless radiation, so I recommend them to turn off the 5 Ghz wireless, and configure the 2.4 Ghz for 20 MHz Channel Width, select channel 1, 6, or 11, while starting with 5 dBm output power (transmit power is logarithmic, so 5 dBm is 3mW, wile 20 dBm is 100 mW), and choose the SSID Name and Password. Look for a signal strength of -80 dBm or better (-55 to -60 dBm ideal) is recommended for stable links, and increase the output power until that range is achieved for desired places. Obviously, line of sight and height is appreciated for more effective communication. Increasing the Tx power on any wireless device will create a noise for other wireless devices. The rest you could choose to remain as default or configure more.

[256 MB] Simple to set up with a wireless network and plugging an ethernet cable into the printer. Produces nice photos and copies. We use it for everyday use, not high detail work. Do buy extra ink because the starters don't last long,