Rj45 Ethernet Lan Cable Tester

[3.4 lb] A solid built, metal cable tester. I've only used it to test BNC and RJ45 so far, but it's been an incredible product. Helps me double check patching in venues where the wiring isn't always labeled properly. Very clear LED's while testing. Will definitely buy this one again.

[2x HDMI Output ] This cable tester seems to do the job well so far.

[Wall, Ceiling] This is the simple but versatile device that I recommend as a router for all my friends and family, and will also use as an access point for them or small businesses where integrated solutions are too complex for a handful of users. Qualcomm Atheros chipset, with 350 Mbps WAN To LAN capability routing. Firmware has stabilized and now I am able to fully recommend (January 2021), albeit feature set is still lacking compared to AirRouter predecessor, but offers core abilities for baseline users. For the airCube, plug the ethernet from the modem into the WAN (eth0), then you may connect your computer via wireless or ethernet to the LAN ports (PoE In, 2, or 3), typing in https://192.168.1.1 in your web browser, with ubnt as username, and password printed on the label beneath. Most people are now aware and desiring to minimize wireless radiation, so I recommend them to turn off the 5 Ghz wireless, and configure the 2.4 Ghz for 20 MHz Channel Width, select channel 1, 6, or 11, while starting with 5 dBm output power (transmit power is logarithmic, so 5 dBm is 3mW, wile 20 dBm is 100 mW), and choose the SSID Name and Password. Look for a signal strength of -80 dBm or better (-55 to -60 dBm ideal) is recommended for stable links, and increase the output power until that range is achieved for desired places. Obviously, line of sight and height is appreciated for more effective communication. Increasing the Tx power on any wireless device will create a noise for other wireless devices. The rest you could choose to remain as default or configure more.

[512] I use this with a 20gbps ethernet SFP+ backbone uplink from the UniFi SFP+ Aggregation Switch. My LAN has never been faster!

[1x USB-C] Not many laptops come with an RJ45 Ethernet connection anymore. I don't know it's faster than wifi, but it's definitely not slower. Enabled me to use my CAT6a cable to go directly to my router. Just plugged it in my Windows 10 laptop, and it works great.

[RoHS] Short Ethernet cable that works.

[RJ45 Male] A Ethernet cable that works! And it was low cost.

[0.265 lb] I like this tester...

[RJ45 Male] RJ45 plugs solidly connected. Cable is well built with thick copper conductors (I could not measure AWG but clearly thicker than Cat5/5e cables) and shielded. I cut the cable in half and ran the cable but have not connected up as yet - as my new RJ45 connectors (from another company) were not as advertised.

[48 lb] I never see that perfect LAN