Screen Projector Thin S8 Plus

[1.1] We use this projector screen in our church activities.

[ABS] I installed them next to my projector screen and they sound great.

[8 lb] This tray is a must if you plan on scanning thin standard slides on the PowerSlide X Plus scanner. The included tray only works with thick or coated slides (and after scanning over 2k slides i have not seen a thick slide yet).

[1x HDMI Male] Anyone looking to extend there monitor onto a TV screen or projector this is the way to go.

[Download] Using this to decode an NDI source to a projector in Church services with live stream. We previously were sending the Presentation Laptops screen to the OBS computer via NDI, and used a separate proprietary wireless video feed to the main projector. Got this so we can use the same NDI source for both and eliminate the wireless projector feed. It is working well. One thing to be aware of: the projector will display will go blank in a couple of seconds if there is no video and audio activity when using NDI Screen Capture as the source. This can be an issue during power points with static screens. You can set the decoder to keep the last thing displayed on the screen or allow it to go blank. I prefer it to go blank so I know something is wrong right away. You can also resolve by making sure the NDI Screen Capture is using an active audio source (like the microphone). This decoder has been reliable and is reasonably priced. Perhaps other decoders won't have the inactivity issue but they are also more expensive. This has not been a show stopper for us.

Using this to decode an NDI source to a projector in Church services with live stream. We previously were sending the Presentation Laptops screen to the OBS computer via NDI, and used a separate proprietary wireless video feed to the main projector. Got this so we can use the same NDI source for both and eliminate the wireless projector feed. It is working well. One thing to be aware of: the projector will display will go blank in a couple of seconds if there is no video and audio activity when using NDI Screen Capture as the source. This can be an issue during power points with static screens. You can set the decoder to keep the last thing displayed on the screen or allow it to go blank. I prefer it to go blank so I know something is wrong right away. You can also resolve by making sure the NDI Screen Capture is using an active audio source (like the microphone). This decoder has been reliable and is reasonably priced. Perhaps other decoders won't have the inactivity issue but they are also more expensive. This has not been a show stopper for us.

[10 oz (286 g)] This thing worked great. This is just what I needed to get my screen up and another screen to my projector up at the same time in my sanctuary. This was great.

[VA LCD] Again for the money this is a great product! I love how amazingly thin the screen is!

[93 ppi] This is a large, nice thin screen with great crisp clear resolution! Love It!

[Front and Rear] After a long hunt for the perfect portable screen for my backyard and cottage, I could not have been happier with this purchase. It is lightweight, easy to setup and take down, and the 1.3 gain screen is very bright with no visible lines during projection. When attaching the screen to the frame, the first corner buttons tend to pop off while stretching the screen to attach other corners, but I found that attaching 3 buttons on each corner at a time helps. I worry that the buttons will wear out over time making it more challenging to attach the screen, but for now it is perfect. If you are planning to use the screen at various locations, as I have, I definitely recommend the Plus model over the less expensive but very similar Yardmaster 2. Because the the height of the screen is adjustable with Plus model, you can set the screen low to the ground for up close viewing such as a small living room if I bring it to a friend's place for example, or higher up if viewed at further distance. The other difference is the screen, which has a brighter gain at 1.3 vs 1.1. This is helpful if using screen with some ambient light. It was money well spent.