Shure Dante Microphones

[20 AWG] Use It with my Shure Beta 58 microphones. Great sound.

[Proprietary] The Ulxd series from Shure is incredibly fast to setup and sync. After using the uhf-r, these are just way better. You also get 3 transmit power levels in this handle which helps out when your antennas are far away from stage. They are metal housed and very strong. The display is very easy to read, ALTHOUGH, I do like the display on the SLXD better, especially on the transmitter. SLXD has better contrast and easier to read. I have also used the Dante on the Ulxd series. Works great. I have 6 in a rack and one cat6 cable puts them all on the network. No xlr needed if you have a Dante enabled mixer. The available frequencies after a scan in WWB6 are usually around 40-50 in Los Angeles in the g50 band, which is plenty for me. The only thing I would like to see Shure improve on is the battery tray contacts. My frantic customers have broken them several times jamming batteries in sideways. Maybe curl the sides of the contacts more so when they do try and sideways insert it might take the battery without snapping off. Other than that, these handles have been rock solid in the many live performances I have used them on.

[90 min] This was a replacement for one of our Shure Wireless Microphones at our Church. It fit perfectly, and now the microphone looks like new again!

[Lithium-Ion] These are a perfect fit for the handheld wireless Shure PG58 microphones.

[Black] I've been singing for 17 years and this microphone is hands down the best one of all Shure microphones, in my opinion. :)

[Low Cut/HPF] What else can we say about these classic microphones?.would be awesome to shure had included a pair of SM81 in the kit.

[Black] these windscreens are a quality product. i use them on my Shure SM57 microphones. they are simply placed over the top of the microphone & have a snug fit.these windscreens differ from the Shure brand windscreens in two significant ways. first, the Shure brand is far more expensive. second, the Shure brand requires a small, eyeglass-type screwdriver to lock the windscreen onto the microphone (the shure brand windscreens can be seen on any presidential podium since 1965).WindTech has provided a much easier, cost-effective, & acoustically transparent way of eliminating unwanted wind &/or pop noise from your microphone.

[Right-angle BNC] We had several systems with a mix of Shure microphones, and the rooms were huge- which affected our coverage. After we installed two of these and mounted them outside of the AV rack up high- we have had zero issues. We also used these in a church AV system that has the AV rack in the balcony. Complete satisfaction with this product. It has a very wide range and frequency to work with. Highly recommend if you have signal drop outs or using multiple receiver frequencies.

[Black] I use these with the Shure MX-4xx and SM99 series microphones. A simple yet elegant solution to clean up the look of head table microphones. The microphone just plugs into this weighted based. There is about 7' of cable terminated with an XLR male that extends from this base.

[True Diversity] Once I figured out the colored rings around the top and bottom of the microphones it was very easy to set up. One mic comes pre set as mic A and one as mic B. I figured that, used the IR to set it and I was off and running. I can set this up with my Fender Passport Event or my smaller Anchor Audio AC 130+. This was $ less than the Shure microphone set up and I very happy that I purchased this over the Shure.