Studio Mixer Recorder

[3.4 lb / 1.5 kg] This is an amazing mixer and recorder! You can you use it in studio mode or take it to the gig. Either way, it works better than most!

[Aluminum] Using this length mixer to recorder in my bag, great addition, better than the 3''

[Metal] I use it in my Home Studio with keyboards and a mixer. S/N Ratio is very low.

[0.395 lb] Works well, sturdy cable. Goes from mixer to my Tascam recorder via the mic output.

Works well, sturdy cable. Goes from mixer to my Tascam recorder via the mic output.

[22.8" / 580 mm] This is my second one I'm using one for a Behringer XENYX X1832USB mixer,and one for a Tascam DP32sd digital Recorder love them both

[Attenuator/Pad] 1- Cheap 2- Does exactly what I wanted 3- does not come with instructions. THAT'S HOW EASY TO USE THAT IS! 1- Plug the source IN 2- send the signal to your recorder. 3- Adjust volume desired... 4- DONE! I shoot weddings and I refuse to get audio from the camera's mic. My clients get very hi-end audio from me. it simply re-creates the reception event when you have CLEAN stereo sound coming straight from the DJ's mixer. unfortunately, 99.9999999% of all DJs will screw up the audio levels from the middle to end of the party letting the input signals get extremely high and i had to STOP this problem. If you use a digital LINE IN recorder such as the Zoom H2, H2N and H4, you cannot afford to record a reception or any live performance that need audio from a mixer without this product!! I made a test myself letting the mixer go nuts with unacceptable audio levels with this device between the mixer and the Zoom. No matter what I did, the distortion was GONE! Then I tried without. BAD DAY! USELESS AUDIO! Buy this with your eyes closed. You cannot go wrong with it! I hope my review helped as I am the first :) What I do: I'm a professional videographer and Audio for Video Specialist for 20 years.

[0.255 lb] I use six of these to link my Behringer X32 mixer to my Alesis ADAT-HD24 hard drive recorder. They seem well constructed and are affordable.

[4 lb] If you have the luxury of separate crew positions for boom operator(s) and sound mixer, get this! The boom op just clips this to his or her belt, plugs in their headphones and the microphone, and then it's mostly just set and forget. The signal quality is so quiet and perfect! (I already have a Sound Devices MixPre-D, which evidently has the same signal chain, so I wasn't surprised.) A word of warning: if the mixer or recorder you plug this into doesn't have line-level inputs, then you won't get much out of this device. The Zoom F4 specifically only has line level if you plug into it with a 1/4 TRS. If you connect this to a mic-level input, you'll have to turn the gain down on one or both device so low as to be difficult to use. If the gain is low on the MM-1, then the headphone output will also be relatively low. So if your recorder doesn't take line-level for input, then don't bother.

[Aluminum Alloy] Good quality mount. I use for cameras, SD recorder/mixer and lights. Great multi-use item.