Universal Window Air Conditioner Bracket

[5 V] This speakerphone is very clear on both ends. Was able to hear the other person speaking clearly even when my portable air conditioner was running in the room.

[C-Wire] Easy to use! Controls air conditioner and furnace. Reads humidity levels. Maintenance tracking and reminders.

This speakerphone is very clear on both ends. Was able to hear the other person speaking clearly even when my portable air conditioner was running in the room.

[Aluminum Alloy] I didn't want a full camera cage, so this universal clamp worked well with my L-bracket.

[White] I wanted this for a NanoStation Loco. It wasn't really clear if this model was supported. Turns out that it is, with a little bit of thought. The NanoStation's shown in all the literature and ads is the taller, thinner version, with two bracket mount on the back. The Loco is shorter and fatter and has only one mounting bracket right in the center. Out of the box, this works fine for a wall (or window) mount where the device is facing away from the mount. However, if you want to use it to mount the device inside a window, that is, facing the mount, the loco won't quite fit. It slides down and hits the arm before the mounting clip is fully seated. However, if you remove the two finger-nuts/bolts holding the two sections and re-assemble reversed, this leaves more space above arm and everything fits perfectly. The mount works just as well.

[0.24 lb] Yes, it is a little pricey, but it is Really Right Stuff!!! I own a universal L bracket that was about $100 less, but I only would use it when needed. The Really Right Stuff L bracket is simply exquisite engineering and worth every $$$. It fits perfectly allowing access to the slide out battery tray and access ports without a need to take it off. It is very light weight. It is the little things that make this worth the $$$. It is perfectly sculpted with rounded edges so it feels perfect when hand holding your camera. Therefore, this stays on the camera all the time and no need to take it off, even when there is no need for a tripod. I LOVE it and glad I purchased even though I already owned an expensive, universal L bracket. Buy this without hesitation!!!

[0.22 lb] Works as advertised. Very flexible with the universal support bracket as well as male and female threaded studs in both 1/4-20 and 3/816.

[15mm LWS] A "professional" lens support with many included height adjustment options without the hefty Arri price. The only downside - the Base Extension is not captive in the Universal Lens Support, so if not attached to the Rolling Bracket or an Extension Post, the Base Extension can fall out of the lens support. The package includes: 3/8 Extension Post x 2 1-3/8" Extension Post x 1 11/16" Extension Post x 1 Rolling Bracket, from base to top of roller is " tall. Rolling Bracket cradle width, from outer edge of each roller is 1-3/4 Rolling Bracket depth at the roller is 7/16 Universal Lens Support is " from top of rod to top of support.

[Arca-Type] I purchased a Kirk L bracket for my D300/battery grip. I need to add an Arca Swiss Clamp to my Manfrontto 3130 pan/tilt head. This system uses the 200PL plates. During my research, I found Kirk made the QR-AB1QR universal assembly that would mount to the 200PL plate. Worked as advertised. Kirk is made in USA,fit and finish - excellent, integrated hex wrench (enabled me to remove the L bracket when not in use),I wanted a clamp that was built by the same manufacture to guarantee 100% comparability to the L bracket, and the silver clamp knob (easy to see, with the quick turn, adjustment felt smooth/precision feel,locked securely to the bracket and no exposed internal mechanisms). I would like to have seen Kirk add the bubble level that is available on their other QRC mounts. Just be aware the bottom of the QR-AB1QR is different from the Kirk QRC-3.18 clamp (this can be mounted on other Arca Swiss ball mount) vs the square bottom on the QR-AB1QR which mounts on the universal plate (anti rotation).

[12.7 x 7 x 3.2"] My new iPad air 2 hangs around the kitchen mostly (we have a great bay window there) and I use it for cooking as well as when my granddaughter comes to play with it. The base is very secure, even on a glass tabletop, and I can make the pad face completely towards the ceiling for cooking, but also adjust it for other uses. Adjustments are seemingly infinite and secure. I do not imagine I would have to repurchase it, it is very sturdy. Although the backstrap for holding up the iPad during presentations seems a but unnecessary for my purposes, I can se where it would be useful.