Usb C Motherboard Connector Adapter

[0.3 lb] Worked perfectly in a Gigabyte F2A68HM-H motherboard running Windows 10 64. I needed a USB 3.x card that fit a PCI slot. The motherboard has a PCIe slot but the dual slot graphics card blocked its use. Wish: Wish the board had an internal USB connector to connect an internal USB connector in my case.

I have another review that I wrote about this mic, but B&H's website doesn't appear to let me update that review. I've now been using this mic almost daily for over a year. The audio is crisp and clear, background noise is kept to a minimum, and people on the other end of the meeting/phone call give compliments on the detail that this mic captures. I used to use a condenser mic, but that also had the annoying feature of picking up a lot of 60Hz hum. This mic doesn't do that and I didn't have to make any adjustments to the room either. For the person who mentioned they couldn't fit it in a shockmount, it has one internally. That is why the mic is the size that it is. For those complaining about the USB port, mine hasn't had any issues. I accidentally bent the micro usb connector on the cheap cable they shipped with it and the mic survived just fine. The cable, on the other hand, was useless after that. I solved this problem by finding a 90 degree USB adapter so that the connector isn't pointing straight out the back of the mic. It now sits mostly flush and swiveling the mic is more likely to cause the adapter to disconnect at the other end. If your laptop, like mine, is usb-c only, don't try to buy long usb-c to usb-c cables. They are crazy expensive. Instead, try to buy a usb-c to mini or micro usb-b cable. They are much cheaper. My setup is usb-c to micro usb (10 feet), then an adapter from micro-usb to usb-c (1 inch), and then finally a short usb-c to 90 degree micro-usb adapter (6 inches).

[Cardioid] I have another review that I wrote about this mic, but B&H's website doesn't appear to let me update that review. I've now been using this mic almost daily for over a year. The audio is crisp and clear, background noise is kept to a minimum, and people on the other end of the meeting/phone call give compliments on the detail that this mic captures. I used to use a condenser mic, but that also had the annoying feature of picking up a lot of 60Hz hum. This mic doesn't do that and I didn't have to make any adjustments to the room either. For the person who mentioned they couldn't fit it in a shockmount, it has one internally. That is why the mic is the size that it is. For those complaining about the USB port, mine hasn't had any issues. I accidentally bent the micro usb connector on the cheap cable they shipped with it and the mic survived just fine. The cable, on the other hand, was useless after that. I solved this problem by finding a 90 degree USB adapter so that the connector isn't pointing straight out the back of the mic. It now sits mostly flush and swiveling the mic is more likely to cause the adapter to disconnect at the other end. If your laptop, like mine, is usb-c only, don't try to buy long usb-c to usb-c cables. They are crazy expensive. Instead, try to buy a usb-c to mini or micro usb-b cable. They are much cheaper. My setup is usb-c to micro usb (10 feet), then an adapter from micro-usb to usb-c (1 inch), and then finally a short usb-c to 90 degree micro-usb adapter (6 inches).

[OLED] good information and correct this is type C to C connector ok I know i make mistake to buy this i am looking for connectors USb type micro usb to usb but is ok i need to found one adapter to connect in this type C ..i think my note 9 galaxy have this adapter to connect in this usb ...well i needs to figured but this vameter i like be cause some times cant connect others charges and male damage in the devices so whit this you have the correct information abut out voltage and Amperes examples :corriente DC 5Vot/2Amp. etc..

[0.965 lb] This display adapter has enough flexibility to support just about any current display connection requirements. Particularly if you're watching content from an Apple product to a 4K television, you'll find the size and the ease of switching between, say, 4K and HDMI connections simple and easy to manage. The unit itself is quite heavy and the USB-C connector is manufactured from rugged cabling that should last well beyond the 2 year warranty period. The housing of the unit is polished aluminum and the USB-C connector folds in and and holds tight. I tested each of the connectors for fit and each one held tightly without having to be screwed in. Signal quality through the tested ports were good. Packaging was easy to break down for recycling purposes.

[0.1 lb] The Angelbird USB 3.2 Gen 2 Type-C to SATA 6 Gb/s Adapter provides a SATA Connector with a Type C Connector. Like other Angelbird products it is well engineered to standards including USB Protocols, which are especially important to an external drive online. The available Type C to Type A Adapter helps adhere to these Standards achieved in USB 3.1 and 3.2, making this an indispensable and even preferred Connector.

[20" / 51 cm] Dummy battery works perfectly with my a6600 and a7iii. Just need an adapter from USB to the connector

[USB-C Male] One of the purposes for this adapter was to connect a USB mouse to my iPad through the lightning connector. Initially, I bought a knock off from Amazon and it wouldn’t work at all until I started doing something manipulating the connectors, particularly the USB connector, and even at that when I got that working And the mouse was mostly working, I couldn’t get the iPad to charge through the device unless I did some more manipulating of the power input connector and the lightning connector going into the iPad. Needless to say, it was hit or miss when I was trying to use it. However, when I got the real Apple adapter, I plugged it in first time worked and I haven’t had any kind of problem with it. Even the mouse works much better response much better with the iPad. So it’s not worth trying to save a few bucks, get the real thing from folks that you know you can trust, B&H Photo.

[0.05 lb] For a quick change of connector type for USB we use Type-C to Type-A adapters to accomplish this task. You may ask why, from time to time a cable was damaged and not notices. I can use a Type-C to Type-C cable when I need a Type-C to Type-A cable but only with a adapter like this Crucial USB adapter.

[1] gets the job done when troubleshooting usb devices straight to the motherboard