Vivitar Mariner Underwater 35Mm Camera

[0.85 lb] Use on O-rings for underwater camera housings

[Blue] keeps the dreaded underwater camera fog at bay.

[Black / Red] I looked for these on two or three other underwater camera/SCUBA gear sites with no luck. Of course, when I went to B&H, they were available.

I looked for these on two or three other underwater camera/SCUBA gear sites with no luck. Of course, when I went to B&H, they were available.

[FUJIFILM X] Very tight mount on both the lens (vivitar 70-150mm) and the camera (X-T20). Very slight extension tube effect allows for closer focus with no distortion on image quality.

[Bounce Diffuser] You would think that a chunk of translucent plastic would be useless as an on-camera flash modifier. I believe this apparatus works as a light distributor in 360 degrees. I tested this product with both a Vivitar 283 and a Vivitar 285HV on a EOS 5D Mark III. It seemed to work best when I set the camera setting to Av mode at a set aperture rather than in M mode and let the flash do the work. Of course, using a slower shutter speed allowed the available light to "invade" the image and allow more "depth of field" with the allowance of light. In the Av mode, the shutter speed was slower, the IS of the lens allowed for a focused image, and that allowed for the exposure to be "perfect" if there is such thing. I cut my teeth on film and digital follows in the tradition of Adam's Zone System and everything works on digital as it did, does in analog. I was completely blown away to this fact. Enjoy your new toy. This is a PJ's staple for "controlled" flash light!

[Yes] Considering the name vivitar from years gone by - was never the top brand but made its name present in the camera business. I bought this bag hoping that it would meet my needs but thinking maybe not. After I received the bag - this bag is great - the photo does not do it justice! I love mine!

[0.195 lb] I am trying to use older Vivitar lenses with my current and future Canon camera's. Bought this as it bridged the gap between the cannon bayonet connection and the vivitar screw mount. Tried it yesterday and it works perfectly. The adapter did get stuck on the camera until I used something to grip the ring better....but that's just part of my learning curve.

[12 lb] Great for holding 35mm camera while boating.

[4.605 lb] As alway, B&H came thru when no one else could. These days, it's hard to get parts for my underwater camera housing. B&H came thru.