Wireless Lan Router

[125 VAC] I have a Modem, Router, LAN Switch, CRT TV, HDTV, 14 gaming consoles, and a VCR hooked up on this. It has been amazing at both consolidating space & allowing me to keep everything plugged in. No issues when turning on devices, especially after having issues with a previous power strip. Strip has a reset with 15 Amp circuit breaker. My apartment was built in 1924, so it's been helpful with the bad elwctricity. *I didn't utilize the mount bracket.

[1.5 MB] Currently using it for subnetting muy LAN using VLANs. It has worked without issues together with my pfSense router/firewall. Good buy.

[0.46 lb] Plugged it into the the LAN (towards the router) and the other port towards the Ubiquiti bridge (ports are clearly marked) and it worked perfectly. I did add ESD protection with a driven ground between the bridge and this device, but am pretty sure this device stated it also provides that protection. I bought a spare to be safe, but suspect it will not be needed as build quality appears excellent. Thanks for selling a quality product!

[12 VDC] Only need 10gbps to connect my Synology to computer for fast LAN transfers. I use this downstream from my router and everything works as expected. Great unmanaged switch for 10gbps.

[1.83 lb] I updated my previous router (RT-N53) since the LAN speed was 100 MB instead of 1GB and I wanted to stay with the same brand since I never had any issues with that previous router. I like the lifetime virus protection and app access.

Plugged it into the the LAN (towards the router) and the other port towards the Ubiquiti bridge (ports are clearly marked) and it worked perfectly. I did add ESD protection with a driven ground between the bridge and this device, but am pretty sure this device stated it also provides that protection. I bought a spare to be safe, but suspect it will not be needed as build quality appears excellent. Thanks for selling a quality product!

[3.545 lb] We recently had fiber installed in our neighborhood. I have been using a WRT54GL with dd-wrt for years, but I knew my router would cause me to lose most of the speed I would gain when I went to fiber. I bought the WRT3200ACM because the specs looked good. Although I have not switched from cable to fiber yet, the performance on my LAN is blazing compared to my trusty WRT54GL. I move a good bit of data over my LAN with backups and sharing large documents. Jobs that used to take 10 minutes are completing in less than 1 minute. I love the 2 bands as well. I am very pleased with all aspects of this new router. I will say if you are cramped for space, the WRT3200ACM has a larger footprint. I have also noticed a significant improvement in Wi-Fi. Since I do not use Wi-Fi much, that was not a deciding factor for me.

[0.115 lb] I was a bit worried because we have such old wireless equipment on our LAN, but the adapter installed and worked with no problems.

[Wall, Ceiling] This is the simple but versatile device that I recommend as a router for all my friends and family, and will also use as an access point for them or small businesses where integrated solutions are too complex for a handful of users. Qualcomm Atheros chipset, with 350 Mbps WAN To LAN capability routing. Firmware has stabilized and now I am able to fully recommend (January 2021), albeit feature set is still lacking compared to AirRouter predecessor, but offers core abilities for baseline users. For the airCube, plug the ethernet from the modem into the WAN (eth0), then you may connect your computer via wireless or ethernet to the LAN ports (PoE In, 2, or 3), typing in https://192.168.1.1 in your web browser, with ubnt as username, and password printed on the label beneath. Most people are now aware and desiring to minimize wireless radiation, so I recommend them to turn off the 5 Ghz wireless, and configure the 2.4 Ghz for 20 MHz Channel Width, select channel 1, 6, or 11, while starting with 5 dBm output power (transmit power is logarithmic, so 5 dBm is 3mW, wile 20 dBm is 100 mW), and choose the SSID Name and Password. Look for a signal strength of -80 dBm or better (-55 to -60 dBm ideal) is recommended for stable links, and increase the output power until that range is achieved for desired places. Obviously, line of sight and height is appreciated for more effective communication. Increasing the Tx power on any wireless device will create a noise for other wireless devices. The rest you could choose to remain as default or configure more.

[2.935 lb] The MF273dw printer is very easy to set up on a wireless LAN and is very easy to use. The included CD provided all the drivers needed to print wirelessly from computer to printer. Also, AirPrint from tablet to this printer worked great. This printer is loaded with features for home or office use. I give it an A+. B&H Photo Video delivered this printer fast in excellent protective packaging, and with free shipping.